Getting Started with 201 Advanced Kit (Mac)

From Microduino Wiki
Revision as of 16:34, 23 May 2018 by Sonny (talk | contribs) (Created page with "right|thumb|link=mCookie Advanced Kit|<center>[[mCookie Advanced Kit</center>]] =Download and Install Software= {{IDE Setup Legacy (Mac)‎...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Download and Install Software

Note: This product is discontinued and no longer supported in the latest software package.
Please download the legacy software package here: http://microduinoinc.com/downloads/Arduino+IDE+1.6.9+for+Microduino.dmg
Arduino Logo.png

  • Change your settings to allow identified developers by going to: (Apple Logo) >>> System Preferences...
  • Then go to Security & Privacy.

MacTutorial Settings 2.png

  • Click on then Lock icon and enter your credentials to be able to change settings.
  • Under Allow apps download from: select App Store and identified developers
  • Click the Lock icon again to lock and save changes.

MacTutorial Settings 3.png

  • Open the downloaded file. A folder will open containing the Microduino IDE and drivers for the hardware.

MacTutorial 1 OpenDmg.png

  • Open the Drivers folder. Drivers are needed to communicate with the Microduino hardware.

MacTutorial 2 DmgContents.png

  • Install ONE of the driver packages:
    • Driver_OS10.3.mpkg if you have Mac OS 10.3 or below.
    • Driver_OS10.4-10.8.mpkg if you have Mac OS 10.4 to Mac OS 10.8.
    • Driver_OS10.9-Newer.mpkg if you have Mac OS 10.9 or newer.
  • Follow the on-screen instructions to install the driver.

MacTutorial 3 InstallDriver1.png

  • Once completed. Drag the Arduino for Microduino.app application to your Applications folder to install the IDE.



MacTutorial 6 DragApp.png]

  • The software is now installed and ready to use. Double-click the application to launch it!

MacTutorial 7 InstalledApp.png MacTutorial 8 LaunchApp.png

Configuring and Testing the Software/Hardware

  1. Open the Microduino software.
    ArduinoIcon.png

  2. Go to “Tools > Board” and select “Microduino/mCookie-Core USB (32u4)”
    Select Board Legacy (Mac).png

  3. Go to “Tools > Processor” and select “USB”
    Select CoreUSB Legacy (Mac).png

  4. Connect the CoreUSB to your computer using a MicroUSB cable. DO NOT have any other modules stacked or connected.
    CoreUSB Ble pc.jpg

  5. Go to “Tools > Port” and select the port. It is usually the one that is select-able. It should be labeled /dev/cu.usbmodem____ (Arduino Leonardo)
    Select CoreUSB Port Legacy (Mac).png

  6. With the default sample code. Hit upload (right arrow icon on the top left of the software).
    Upload CoreUSB Legacy (Mac).png

  7. The code will compile and will say upload complete if successful. Congratulations the software setup is complete!
    Upload CoreUSB Complete Legacy (Mac).png

The 201 Advanced Kit Projects can be found under File > Examples > 00.mCookie
101 201 301 Project Examples (Mac).png

Projects

Follow the printed manual to build and program 201 Advanced Kit's projects.


Download the digital version of the printed manual:
201 Printed Manual.png