|
Microduino-Core LPC is a 32-bit microcontroller development core board with the LPC824b as the core, and it is a open-source controller module.
Microduino-Core LPC uses mbed platform C++ language development environment. Players can use Microduino together with other electronic components, modules, and sensors to make out abundant funny interactive works.
Features
- The microcontroller is based on Cortex-M0+ kernel;
- CPU frequency can achieve 30MHz;
- The size of the program memorizer is 32 kB;
- The size of data RAM is:8 kB;
- Small, cheap, stackable and open;
- Open source hardware circuit design, and compatible-with-mbed development environment;
- Unified Microduino interface specification and abundant periphery modules, which can be quickly extended and connected with other modules and sensors which meet the Microduino interface specification, conveniently and flexibly;
- 2.54-spacing mother line interface is convenient for integrating to the pegboard.
Specification
| Flash |
256 KB
|
| SRAM |
48 KB
|
| Speed of the clock |
120 MHz
|
- SupportDSP
- The DMA controller with 16 channels.
- Support RTC.
- Support hardware CRC.
- Each chip has a 128-it ID number singly.
- Support the generation of the hardware random number.
- Digital I/O ends, 22 totally:
- On the module labeled D0~D13, A0~A7
- Analog I/O ends, 11 totally:
- On the module labeled A0, A1, A2, A3, SDA, SCL, A6, A7, D4, D5, and D6;
- Each of them provides 16-bit resolution. By default, the range of the measurement of the analog voltage is the voltage value from GND to 3.3V;
- PWM supporters, 6 totally:
- On the module labeled D0, D1, D6, D7, D8, and D9.
- Serial port supporters, 3 totally:
- On the module labeled D0(RX), D1(TX), D2(RX), D3(TX), D4(RX), and D5(TX).
- SPI supporter, 1 totally;
- On the module labeled D13(SCK), D12(MISO), D11(MOSI), and D10(SS).
- I2C support, 1 totally:
- On the module labeled SDA, SCL.
- External interrupt supporters, 7 totally:
- On the module labeled D2, D4, D9, D12, D13, A0, and A3
| Pin
|
Original Pin Name
|
Map Pin Name
|
Digital Pin
|
Analog Pin
|
interrupt
|
PWM
|
Serial
|
SPI
|
I2C
|
Power
|
| 1 |
VCC |
+5V |
|
|
|
|
|
|
|
+5V
|
| 2 |
VCC |
+3V3 |
|
|
|
|
|
|
|
+3.3V
|
| 3 |
PTA5 |
D7 |
yes |
|
|
yes |
|
|
|
|
| 4 |
PTA12 |
D8 |
yes |
|
|
yes |
|
|
|
|
| 5 |
PTA13/LLWU_P4 |
D9 |
yes |
|
yes |
yes |
|
|
|
|
| 6 |
PTC8 |
D10 |
yes |
|
|
|
|
SS |
|
|
| 7 |
PTC7 |
D11 |
yes |
|
|
|
|
MISO |
|
|
| 8 |
PTC6/LLWU_P10 |
D12 |
yes |
|
yes |
|
|
MOSI |
|
|
| 9 |
PTC5/LLWU_P9 |
D13 |
yes |
|
yes |
|
|
SCK |
|
|
| 10 |
AREF |
AREF |
|
|
|
|
|
|
|
|
| 11 |
TPB0/LLWU_P5 |
A0 |
yes |
yes |
yes |
|
|
|
|
|
| 12 |
TPB1 |
A1 |
yes |
yes |
|
|
|
|
|
|
| 13 |
PTC0 |
A2 |
yes |
yes |
|
|
|
|
|
|
| 14 |
PTC1/LLWU_P6 |
A3 |
yes |
yes |
yes |
|
|
|
|
|
| 15 |
PTB3 |
SDA |
yes |
yes |
|
|
|
|
SDA |
|
| 16 |
PTB2 |
SCL |
yes |
yes |
|
|
|
|
SCL |
|
| 17 |
PTC2 |
A6 |
yes |
yes |
|
|
|
|
|
|
| 18 |
PTD1 |
A7 |
yes |
yes |
|
|
|
|
|
|
| 19 |
PTA1 |
D0 |
yes |
|
|
yes |
UART0(RX) |
|
|
|
| 20 |
PTA2 |
D1 |
yes |
|
|
yes |
UART0(TX) |
|
|
|
| 21 |
PTD2/LLWU_P13 |
D2 |
yes |
|
yes |
|
UART2(RX) |
|
|
|
| 22 |
PTD3 |
D3 |
yes |
|
|
|
UART2(TX) |
|
|
|
| 23 |
PTE1/LLWU_P0 |
D4 |
yes |
yes |
yes |
|
UART1(RX) |
|
|
|
| 24 |
PTE0/CLKOUT32K |
D5 |
yes |
yes |
|
|
UART1(TX) |
|
|
|
| 25 |
PTD5 |
D6 |
yes |
yes |
|
yes |
|
|
|
|
| 26 |
RESET |
RST |
|
|
|
|
|
|
|
|
| 27 |
GND |
GND |
|
|
|
|
|
|
|
GND
|
Documents
Development
- 1.Enter mbed Main page, and register.
- 2.After the registration, return to Main page, then click the "Compiler" on the top right corner to enter the online compiling mode.
- 3.After compiling, click "Compile" to download file bin automatically after compiling and linking successfully.
- 4.Download JFlash: https://www.segger.com/jflash.html
- 5.Use JFlash to download bin to MK22 to run it.
Application
FAQ
Purchase
History
Gallery
Frontage
Back
Video
|
