Microduino-Module Sensor Hub

From Microduino Wiki
Jump to: navigation, search
Language: English  • 中文
Microduino- Sensorhub -rect.jpg

Microduino-Sensorhub is used to cooperate Microduino Sensor Series, to make it convenient that the sensors connect with the cores in Upin27, and extend the experiment.

The sensor / trinket connector are 4 pin, 1.25mm pitch JST connectors.





Features

  • Integrate 12 sensor interfaces.
  • The size is small, and the sensor interfaces integrate on the Upin27 baseboard.

Specification

  • Include digital, analog, serial port, IIC interfaces and so on;
  • The specification of the sensors interfaces is :GND, VCC, signal 1, and signal 2;
  • Two IIC interface.
  • Description of pins:
SENSORHUBtips.jpg


  • Electrical level of pins:
    • The electrical level of IIC interface is 3.3V by default, and the one of other IO interfaces is 5V.
    • If there is a need, you can change the electrical level of other IO interfaces through adjusting the jumpers.
Sensorjump.jpg

Documents

Development

  • Stack it with Microduino core, and connect it with Microduino sensors externally. You can choose suitable interface according to different sensors.

Application

Purchase

History

Gallery

Video