Template:IDE Setup (Windows)

From Microduino Wiki
Revision as of 15:54, 25 March 2019 by Sonny (talk | contribs)
Jump to: navigation, search
Note: If you have a previous version installed already, you must uninstall that version prior to installing a newer version.
  • Go to Control Panel and uninstall the Arduino IDE for Microduino.
  • Delete the C:\Program Files (x86)\Arduino IDE for Microduino folder as some legacy files may cause issues with a new installation.

Then proceed to the next steps.

1. Download the latest Windows IDE: HERE

Arduino Download.png

2. Double click on the setup file to start the installation process. Click Next.

WinInstallNew 01.png

3. The next window will allow you to select which options to install. Leave all checked and click Install.

WinInstallNew 02.png

4. The installation process will begin for the Arduino IDE.

WinInstallNew 03.png

5. Wait until it is complete.

WinInstallNew 04.png

6. After the Arduino IDE has been installed, a window for driver installation will appear. Click Next.

WinInstallNew 05.png

7. Click on "I accept this agreement" and click Next to start the drivers installation.

WinInstallNew 06.png

8. After the drivers are installed, click Finish.

WinInstallNew 07.png

9.Installation is now complete! Click on Finish.

WinInstallNew 08.png

10.If you left the run option checked, the software will start to launch. Otherwise locate the program shortcut on your desktop or start menu and launch it.

WinInstallNew 09.png

11. The software is now ready to be used!

WinInstallNew 10.png