View source for Short press and long press of switches

{| style="width: 800px;"
|-
|
<p style="color: #4F4E4E;font-size:220%">'''Sensor_Key Library-Sample of Switches’ Long Press and Short Press'''</p>
<br>
In the following samples, Core is used to detect the [long press] and [short press] actions of digital, analog, and virtual switches. 
<br>
<br>
<p style="color: #E87E05;font-size:135%">Required Hardware</p>
*[[mCookie-Core]]
*[[mCookie-Battery]]
*[[mCookie-Hub|mCookie-Hub]]
*[[Sensor-Crash]]
<br>
[[File:Sensor-Crash_setNumber_module.jpg|600px|center]]
<br>
<br>
<p style="color: #E87E05;font-size:135%">Circuit Assembly</p>
Connect Crash to pin A0/A1 on Hub. 
<br>
Stack Battery, Core and Hub together, use MicroUSB cable to connect them to computer. For initial use, please refer to: [[AVR Core: Getting_Started |Getting Started]]。
<br>
[[File:Sensor-Crash_circuit.jpg|600px|center]]
<br>
<br>
<p style="color: #E87E05;font-size:135%">Code</p>
*Identify the [long press] and [short press] actions within corresponding sections of analog sensors.
<source lang="c++">
#include <Microduino_Key.h>

AnalogKey keyAnalog(A0);

void setup() {
  Serial.begin(9600);
  keyAnalog.begin(INPUT);
}

void loop() {
  switch (keyAnalog.readEvent(0, 50)) {   //(analog minimum, analog maximum)
    case SHORT_PRESS:
      Serial.println("KEY (analog) SHORT_PRESS");   //Short press
      break;
    case LONG_PRESS:
      Serial.println("KEY (analog) LONG_PRESS");    //Long press 
      break;
  }

  delay(50);
}
</source>
<br>
*Identify digital sensors’ [long press] and [short press] actions within corresponding sections. 
<source lang="c++">
#include <Microduino_Key.h>

DigitalKey keyDigital(A0);

void setup() {
  Serial.begin(9600);
  keyDigital.begin(INPUT_PULLUP);
}

void loop() {
  switch (keyDigital.readEvent()) {
    case SHORT_PRESS:
      Serial.println("KEY (digital) SHORT_PRESS");   //Short press 
      break;
    case LONG_PRESS:
      Serial.println("KEY (digital) LONG_PRESS");    //Long press 
      break;
  }

  delay(50);
}
</source>
<br>
*Identify [long press] and [short press] actions of corresponding states of analog switches. 
<source lang="c++">
#include <Microduino_Key.h>

VirtualKey keyVirtual;

void setup() {
  Serial.begin(9600);
  keyVirtual.begin();
  pinMode(A0, INPUT_PULLUP);
}

void loop() {
  bool val = !digitalRead(A0);  //val any bool variables 
  switch (keyVirtual.readEvent(val,1500)) {
    case SHORT_PRESS:
      Serial.println("KEY (Virtual) SHORT_PRESS");   //Short press 
      break;
    case LONG_PRESS:
      Serial.println("KEY (Virtual) LONG_PRESS");    //Long press 
      break;
  }

  delay(50);
}
</source>
<br>
<p style="color: #E87E05;font-size:135%">Relative Cases</p>
*[[Sensor_Key_Reference]]: switches control library
*[[States and actions of switches]]: detect states and actions of switches. 
|}
<br>
<br>
<p style="font-size:115%">[[Sensor-Crash|Return to Sensor-Crash]]</p>