View source for Microduino Light indicator-OLED(TSL2561)

{{Language | Microduino 光照指示器-OLED显示(TSL2561)}}
{| style="width: 800px;"
|-
|
==Objective==
This tutorial will teach you to use the TSL2561 sensor and use Microduino OLED to dispaly the result.

==Equipment==
*'''[[Microduino-Core]]'''
*'''[[Microduino-FT232R]]'''
*'''[[Microduino-Weatherstation]]'''
*'''[[Microduino-OLED]]'''
*Other equipment
**USB cable 
**Breadboard Jumper               
**Breadboard 

==Schematic==
[[File:MicroduinoOLED光照指示器原理图(TSL2561).jpg|600px|center|thumb]]
Plug in the OLED to Microduino-Weatherstation.

==Program==
Download program:
https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Sensor/OLED_TSL2561

==Debug==
Step 1：Download TSL2561 library, and uncompress it to libraries folder of Arduino IDE, then restart IDE.
http://learn.adafruit.com/tsl2561/use 

Step 2：Copy the code to IDE and compile it.

Step 3: Set up circuit, as follows:
[[File:MicroduinoOLED光照指示器连接图(TSL2561).jpg|600px|center|thumb]]

Step 4：Run program.

Step 5：Observe OLED, cover the light sensor with the hand and then let it see the light again, look at the digital tube change.

==Result==
Cover the TSL2561 sensor with the hand, the OLED's value will decrease, put the hand away, the value will increase.


==Video==

http://v.youku.com/v_show/id_XNjkyMzQ1OTY4.html

|}