View source for Joypad-Game-Snake

{| style="width: 800px;"
|-
|
==Outline==
We adopt Microduino-Joypad-Game to play the game of Snake. 
==Bill of Material==
*Microduino Equipment 
{|class="wikitable"
|-
|Module||Number||Function 
|-
|[[Microduino-Core]]||1||Core  
|-
|[[Microduino-USBTTL]] ||1||Program download 
|-
|[[Microduino-Joypad]] ||1||            
|}

[[File: Microduino-Joypad-snake.jpg|600px|center|thumb]]
==Download==
TFT library: https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Libraries/_01_Microduino_TFT_ST7735
Joypad lib: https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Libraries/_08_Microduino_Shield_Joypad

Code: 
[https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Joypad/Microduino_JoyPad_Game Microduino_JoyPad_Game]

==Debuging ==
*Step 1: Prepare Microduino-Joypad-Game and you can refer to: [[Microduino-Joypad_Getting_start]]

*Step 2: Stack [[Microduino-Core]] and [[Microduino-USBTTL]] on Microduino-Joypad-Game;  

*Step 3: Download the library and code, and then update the library to compiler【[[Install Arduino IDE Microduino Program Library Support Package]]】

*Step 4: Open program example.  
**Switch the code of the joystick and the button control:   
<source lang="cpp">
    if(Joypad.readButton(CH_SWITCH_R))
  {
    if(Joypad.readButton(CH_SWITCH_2)==0)
      Joy=3;
    else if(Joypad.readButton(CH_SWITCH_4)==0)
      Joy=2;
    if(Joypad.readButton(CH_SWITCH_1)==0)
      Joy=1;
    else if(Joypad.readButton(CH_SWITCH_3)==0)
      Joy=4;
    else if(Joypad.readButton(CH_SWITCH_1)==1&&Joypad.readButton(CH_SWITCH_2)==1&&Joypad.readButton(CH_SWITCH_3)==1&&Joypad.readButton(CH_SWITCH_4)==1)
      Joy=0;
  }
  else
  {
    if(x>280||x1>280)
      Joy=2;//
    else if(x<-280||x1<-280)
      Joy=3;//
    else if(y<-280||y1<-280)
      Joy=1;
    else if(y>280||y1>280)
      Joy=4;
    else
      Joy=0;
  }   
</source>
Button control is the default setting by turning the right switches to the top. Users can change the way of switch.  
*Vibration motor control:  
<source lang="cpp">
Joypad.motor(0);//Close 
Joypad.motor(X);//0-255 The vibration is adjustable.  
</source>

*You can change color in "colour.h".  

Step 5: Compile the code and select the right board and COM port for download after successful compiling.  
*Experience:　
**The initialized picture will remind you "Please move to start". You can move to the right or press the key of "2" to enter the game.  
**It will show the score after the game is over.  
|}