View source for Microduino CC3000 get weather information by internet -203KIT

{{Language|通过Microduino_CC3000互联网获取天气-203KIT}}
{| style="width: 800px;"
|-
|
==Outline==
Project：Microduino CC3000 get the weather information

Objective：Use Microduino CC3000 module to get the specific position's weather information from internet. This experiment need Microduino core+ module. Microduino-core module only can be used for some simple example program, you can try it by yourself.

Difficulty：Elementary

Time-consuming：2 hours

Maker：Microduino Studio-YLB
|-
|

==Bill of Materials==
*Microduino module：（MICRODUINO 202KIT）
{|class="wikitable"
|-
|Module||Number||Function
|-
|Microduino-Core||1||Core module
|-
|Microduino-FT232R ||1||Download program
|-
|Microduino-CC3000||1||WiFi module
|-
|Microduino-OLED||1||Display information
|}
|-
|
[[File:203KIT.jpg|600px|center|thumb|203KIT图片]]

*Other equipment
mic USB data cable, OLED Cable connections, bread board and cable connections
*Software package
Arduino IDE(1.0 release or upper), Microduino test program (Arduino part), download the "TI WIFI SMARTCINFIG" from App Store.
|-
|
==Document==

|-
|
==Debugging==
Setp 1：Set up hardware
*Install all module, use the Microduino extension board as the base which looks very beautiful overall.
|-
|
[[File:203KIT-ok.jpg|600px|center|thumb|203KIT图片]]
|-
|
*If no extension board, use the jumper to connect the Microduino OLED.
|-
|
Step 2：download program
Start Arduino IED, open the Microduino test program, board type choose "Microduino Core +(Atmega644P@16M,5V)", download directly.
|-
|
Step 3: Open the "SMARTCINFIG" application
Connect the IOS to router, turn on "TI WIFI SMARTCINFIG", input the "Password".
|-
|
Step 4：Connect IOS device to Microduino
Observe the Microduino OLED, when text “Waiting for a SmartConfig connection (~60s) ...” appears，press the "Start", then wait for OLED display the result.
|-
|
[[File:SMARTCINFIG-Connection.jpg|600px|center|thumb|SMARTCINFIG-Connection]]
|-
|

==Result==
After connection success, following information will be display in Microduino OLED上.
*City
*Wind speed and direction
*Temperature, humidity
*Visibility
*Access time
|-
|
[[File:cc3000-data.jpg|600px|center|thumb|cc3000-data]]
|-
|
==Note==
*Use Microduino Core+ module。
*Connection process may timeout, not available, need to restart the connection again.
|}