View source for Microduino Wifi gets weather information by the internet -203KIT

{{Language|Microduino_WIFI_gets_weather_information_by_the_internet_-203KIT}}
{| style="width: 800px;"
|-
|
==Outline==
Project: Microduino-WIFI gets weather information by the internet.

Purpose: Acquiring the weather information of a certain place by connecting Microduino-Wifi with the internet. The experiment adopts Microduino-Core+ and Microduino-Core.  

Difficulty: Elementary  

Time-consuming: 2-hour 

Maker:  Microduino Studio-YLB
|-
|

==Bill of Material==
* MICRODUINO 203KIT
{|class="wikitable"
|-
|Module||Number||Function
|-
|[[Microduino-Core+]]||1||Core
|-
|[[Microduino-USBTTL]] ||1||Program download 
|-
|[[Microduino-WiFi]]||1||WiFi module  
|-
|[[Microduino-OLED]]||1||Info. Display  
|-
|[[Microduino-Weather]]||1||Sensor extension board 
(Please be noted that the Microduino-Weather module is not available at store currently. Instead, you can choose the relevant sensors at store www.microduino.cc/store. )
|}
|-
|
[[File:203KIT.jpg|600px|center|thumb|203KIT图片]]

*Other equipment 
MicroUSB cable, OLED connector and breadboard as well as breadboard wire. 
*Software
Arduino IDE(version 1.0 and higher), Microduino test program (Arduino terminal) and download TI WIFI SMARTCINFIG from App Store;  

|-
|

==Document== 

|-
|
==Debugging==
Step 1: Hardware buildup  
*Stack all the modules together. In this experiment, we adopt Microduino extension board as the base, which is easy to connect and looks very beautiful. 
 
|-
|
[[File:203KIT-ok.jpg|600px|center|thumb|203KIT图片]]
|-
|
*If you don't have a Microduino extension, please adopt jumpers when connecting Microduino-OLED.  

|-
|
Step 2: Download example program.  
Start Arduino IDE, open Microduino test program and choose the board Microduino-Core+ (Atmega644P@16M,5V) and download;  
|-
|
Step 3: Open SMARTCINFIG application program. 
Connect IOS device to your router, open TI WIFI SMARTCINFIG and fill the router password;  
|-
|
Step 4: Connect IOS and Microduino 
Watch Microduino-OLED until it appears "Waiting for a SmartConfig connection (~60s) ..." and press "Start" of TI WIFI SMARTCINFIG and then wait for result. 

|-
|
[[File:SMARTCINFIG-Connection.jpg|600px|center|thumb|SMARTCINFIG-Connection]]
|-
|

==Result==
You can see data result on Microduino-OLED after successful connection. 
*Place 
*Wind speed and direction 
*Temperature and humidity  
*Visibility  
*Time acquisition  
|-
|
[[File:cc3000-data.jpg|600px|center|thumb|cc3000-data]]
|-
|
==Note==
*Adopt Microduino-Core+ for debugging in the example.  
*You may meet "connection timeout" or "fail to acquire", just restart please. 
|}