View source for Template:Setup USBTTL With Core (Mac)

# Open the Microduino software. <br> [[File:ArduinoIcon.png|thumb|75px|left]]<br clear=all>
# Go to “Tools > Board” and select “Microduino/mCookie-Core (328p)” <br> [[File:Mac_-_Board_Selection_Cropped.png|frame|left]]<br clear=all>
# Go to “Tools > Processor” and select “Atmega328P@16M,5V” <br> [[File:Mac_-_Select_Processor_Cropped.png|frame|left]]<br clear=all>
# Only have the red Core module and USBTTL module stacked. Then connect the MicroUSB cable to the USBTTL module and the other end to your computer's USB port. <br> [[File:Core%2BUSBTTL_connect.png|thumb|left|400px]]<br clear=all>
# Go to “Tools > Port” and select the port. It is usually the one that is select-able. (If you are using a Mac, it is not the Bluetooth one) <br> [[File:Mac_-_Select_Serial_Port_Cropped.png|frame|left]]<br clear=all>
# With the default sample code. Hit upload (right arrow icon on the top left of the software). <br> [[File:Mac_-_Upload_Button_Cropped.png|frame|left]]<br clear=all>
# The code will compile and will say upload complete if successful. Congratulations the software setup is complete! <br> [[File:Mac_-_Upload_complete_Cropped.png|frame|left]]<br clear=all>