Difference between revisions of "Microduino-Shield Cube-S1"

From Microduino Wiki
Jump to: navigation, search
 
(3 intermediate revisions by the same user not shown)
Line 11: Line 11:
 
==Specification==
 
==Specification==
 
*Electrical specification
 
*Electrical specification
−
**MicroUSB power supply；
+
**MicroUSB power supply;
−
**3.3V constant voltage；
+
**3.3V constant voltage;
−
**Select the 5V or 3.3V power via PWR jumper(The default voltage is 3.3V)；
+
**Select the 5V or 3.3V power via PWR jumper(The default voltage is 3.3V);
−
**Onboard power supply indicator(5V and PWR) ；
+
**Onboard power supply indicator(5V and PWR).
  
 
*Extension
 
*Extension
−
**Onboard reset button；
+
**Onboard reset button;
−
**The fixed OLED base；
+
**The fixed OLED base;
−
**Two serial ports including (RX0,TX0)and (D2,D3)；
+
**Two serial ports including (RX0, TX0)and (D2, D3);
−
**Two IIC interfaces；
+
**Two IIC interfaces;
−
***Two analog button interfaces connected to A7；
+
***Two analog button interfaces connected to A7;
−
**The sensor interface can be selected and combined through jumpers：
+
**The sensor interface can be selected and combined through jumpers:
 
***PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND (Users can make the connection as they like).
 
***PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND (Users can make the connection as they like).
  
Line 32: Line 32:
 
Eagle PCB: '''[[File:Microduino-Cube-S1.zip]]'''
 
Eagle PCB: '''[[File:Microduino-Cube-S1.zip]]'''
  
−
Main Component：
+
Main Component:
−
*3.3V Voltage Stablizing chip LP2985： '''[[File:LP2985.pdf]]'''
+
*3.3V Voltage Stabilizing chip LP2985： '''[[File:LP2985.pdf]]'''
  
 
==Development==
 
==Development==
Line 44: Line 44:
 
*You can download Microduino test program, which together with OLED to test the function of Microduino-Cube-S1's two analog buttons. Just as follows:
 
*You can download Microduino test program, which together with OLED to test the function of Microduino-Cube-S1's two analog buttons. Just as follows:
 
https://github.com/Microduino/Microduino_Tutorials/commit/b0e0fe74269ee0f6a886d8fa8db497ec57cc4073
 
https://github.com/Microduino/Microduino_Tutorials/commit/b0e0fe74269ee0f6a886d8fa8db497ec57cc4073
−
*Hardware Needed：Microduino FT232R, Microduino Core, Microduino-Cube-S1 and Microduino OLED；
+
*Hardware Needed：Microduino FT232R, Microduino Core, Microduino-Cube-S1 and Microduino OLED;
−
*Software Needed：Microduino example program (Arduino part) and Arduino IDE(Version 1.0 and higher)；
+
*Software Needed：Microduino example program (Arduino part) and Arduino IDE(Version 1.0 and higher);
 
*Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", then download directly;
 
*Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", then download directly;
 
*After the download, "No button is pressed " is displayed on the OLED,
 
*After the download, "No button is pressed " is displayed on the OLED,
−
**Press the left button and "Press the left button" will come out, meaning the left button gets pressed；
+
**Press the left button and "Press the left button" will come out, meaning the left button gets pressed;
−
**Press the right button and "Press the right button" will be displayed on the OLED, meaning the right button is pressed；
+
**Press the right button and "Press the right button" will be displayed on the OLED, meaning the right button is pressed;
 
**When no button is pressed, "No button is pressed " will be displayed, which is just like the initial state.
 
**When no button is pressed, "No button is pressed " will be displayed, which is just like the initial state.
  

Latest revision as of 06:24, 4 August 2017

Language: English  • 中文
Microduino-Cube-S1

Features

  • Compatible with the pin of Arduino Uno;
  • Uniform Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard;
  • Onboard analog button and sensor interface;

Specification

  • Electrical specification
    • MicroUSB power supply;
    • 3.3V constant voltage;
    • Select the 5V or 3.3V power via PWR jumper(The default voltage is 3.3V);
    • Onboard power supply indicator(5V and PWR).
  • Extension
    • Onboard reset button;
    • The fixed OLED base;
    • Two serial ports including (RX0, TX0)and (D2, D3);
    • Two IIC interfaces;
      • Two analog button interfaces connected to A7;
    • The sensor interface can be selected and combined through jumpers:
      • PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND (Users can make the connection as they like).
Microduino-Cube-S1
Microduino-Cube-S1-Pinout
Microduino-Cube-S1-Pinout

Document

Eagle PCB: File:Microduino-Cube-S1.zip

Main Component:

Development

Microduino-Cube-S1 is capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard, achieving specific function.

Microduino-Cube-S1

Application

  • You can download Microduino test program, which together with OLED to test the function of Microduino-Cube-S1's two analog buttons. Just as follows:

https://github.com/Microduino/Microduino_Tutorials/commit/b0e0fe74269ee0f6a886d8fa8db497ec57cc4073

  • Hardware Needed：Microduino FT232R, Microduino Core, Microduino-Cube-S1 and Microduino OLED;
  • Software Needed：Microduino example program (Arduino part) and Arduino IDE(Version 1.0 and higher);
  • Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", then download directly;
  • After the download, "No button is pressed " is displayed on the OLED,
    • Press the left button and "Press the left button" will come out, meaning the left button gets pressed;
    • Press the right button and "Press the right button" will be displayed on the OLED, meaning the right button is pressed;
    • When no button is pressed, "No button is pressed " will be displayed, which is just like the initial state.

Bug

History

Picture

Front

Microduino-Cube-S1 Front

Back

Microduino-Cube-S1 Back

Video

Retrieved from "https://wiki.microduinoinc.com/index.php?title=Microduino-Shield_Cube-S1&oldid=21494"