Difference between revisions of "Template:Setup CoreUSB Legacy (Mac)"

Revision as of 16:26, 23 May 2018

Open the Microduino software.
Go to “Tools > Board” and select “Microduino/mCookie-Core USB (32u4)”
Go to “Tools > Processor” and select “USB”
Connect the CoreUSB to your computer using a MicroUSB cable. DO NOT have any other modules stacked or connected.
Go to “Tools > Port” and select the port. It is usually the one that is select-able. It should be labeled /dev/cu.usbmodem____ (Arduino Leonardo)
With the default sample code. Hit upload (right arrow icon on the top left of the software).
The code will compile and will say upload complete if successful. Congratulations the software setup is complete!

@@ Line 1: / Line 1: @@
 # Open the Microduino software. <br> [[File:ArduinoIcon.png|thumb|75px|left]]<br clear=all>
 # Go to “Tools > Board” and select “Microduino/mCookie-Core USB (32u4)” <br> [[File:Select_Board_Legacy_(Mac).png|frame|left]]<br clear=all>
-# Go to “Tools > Processor” and select “USB” <br> [[File:Select_CoreUSB_Legacy.png|frame|left]]<br clear=all>
+# Go to “Tools > Processor” and select “USB” <br> [[File:Select_CoreUSB_Legacy_(Mac).png|frame|left]]<br clear=all>
 # Connect the CoreUSB to your computer using a MicroUSB cable. DO NOT have any other modules stacked or connected. <br> [[File:CoreUSB_Ble_pc.jpg|thumb|left|400px]]<br clear=all>
 # Go to “Tools > Port” and select the port. It is usually the one that is select-able. It should be labeled /dev/cu.usbmodem____ (Arduino Leonardo) <br> [[File:Select_CoreUSB_Port_Legacy_(Mac).png|frame|left]]<br clear=all>
 # With the default sample code. Hit upload (right arrow icon on the top left of the software). <br> [[File:Upload_CoreUSB_Legacy_(Mac).png|frame|left]]<br clear=all>
 # The code will compile and will say upload complete if successful. Congratulations the software setup is complete! <br> [[File:Upload_CoreUSB_Complete_Legacy_(Mac).png|frame|left]]<br clear=all>