Difference between revisions of "Microduino Enc Wired network experiment -302KIT"

From Microduino Wiki
Jump to: navigation, search
(→‎Outline)
(→‎Bill of Materials)
Line 22: Line 22:
 
|Module||Number||Function
 
|Module||Number||Function
 
|-
 
|-
−
|Microduino-Core(Microduino Core+)||1||Slave, receive control signal
+
|Microduino-Core(Microduino Core+)||1||Served as the slave machine,receiving and controlling signal
 
|-
 
|-
−
|Microduino FT232R ||1||Download program
+
|Microduino FT232R ||1||For program download
 
|-
 
|-
−
|Microduino Enc(Microduino Rj45)||2||Wireless communication  
+
|Microduino Enc(Microduino Rj45)||2||For wireless communication
 
|}
 
|}
 
*Other equipment：
 
*Other equipment：
Line 35: Line 35:
 
|Network cable||one
 
|Network cable||one
 
|-
 
|-
−
|micro usb data cable||one
+
|micro USB cable||one
 
|-
 
|-
 
|LED||Four
 
|LED||Four
Line 46: Line 46:
 
|-
 
|-
 
|
 
|
 +
 
==Document==
 
==Document==
  

Revision as of 07:45, 22 August 2014

Language: English  • 中文

Outline

Project: Microduino-Enc Wired Networking Experiment

Objective：Enable Microduihno-Core to connect with the network via Microduino-Enc and Microduino-RJ45, control four LED lights inside the LAN and achieve network control.

Difficulty：Elementary

Time-consuming：One hour

Maker：Microduino Studio-YLB

Bill of Materials

  • Microduino equipment：
Module Number Function
Microduino-Core(Microduino Core+) 1 Served as the slave machine,receiving and controlling signal
Microduino FT232R 1 For program download
Microduino Enc(Microduino Rj45) 2 For wireless communication
  • Other equipment：
Router one
Network cable one
micro USB cable one
LED Four
Bread board one
Breadboard jumper one box
302KIT-module

Document

Debugging

Step 1：Set up router network

Power on router, and connect the PC to network.

Step 2：Set up hardware

Install all Microduino module, use the extension board Microduino Duo-V for easy debugging.

302KIT-module
302KIT-system

Step 3：Downlaod program

Start Arduino IED, open the Microduino example program, board type choose "Microduino Core (Atmega328P@16M,5V)", download directly.

Step 4：Connect the network cable

Connect the microduino RJ45 to LAN port of router.

Step 5：Control the LED in loacal network

Open a new web page, enter into the address "myip". Microduiono networking success can enter the control interface, or can not be opened.

Myip

Result

Connect the Microduino core to network, control the LED by the button on web page. Press button, LED light, then press again, LED off.

Note

  • Microduino Enc must be used with Microduino RJ45 together.
  • Need configure the MAC address and ip address in local network.

Video

http://v.youku.com/v_show/id_XNjY1Njg5Nzcy.html

Retrieved from "https://wiki.microduinoinc.com/index.php?title=Microduino_Enc_Wired_network_experiment_-302KIT&oldid=2444"