Difference between revisions of "Microduino-Shield Cube-S1"

Microduino-Cube-S1

Features

• Compatible with the pin of Arduino Uno;
• Uniformed Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard;
• Onboard analog button and sensor interface;

Specification

• Electrical specification
  • MicroUSB power supply；
  • 3.3V constant voltage；
  • Select the 5V or 3.3V power via PWR jumper(The default voltage is 3.3V)；
  • Onboard power supply indicator(5V and PWR) ；

• Extension
  • Onboard reset button；
  • The fixed OLED base；
  • Two serial ports including (RX0,TX0)and (D2,D3)；
  • Two IIC interfaces；
    • Two analog button interfaces connected to A7；
  • The sensor interface can be selected and combined through jumpers：
    • PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND (Users can make the connection as they like).

Microduino-Cube-S1

Microduino-Cube-S1-Pinout

Microduino-Cube-S1-Pinout

Document

Eagle PCB: File:Microduino-Cube-S1.zip

Main Component：

• 3.3V Voltage Stablizing chip LP2985： File:LP2985.pdf

Development

Microduino-Cube-S1 is capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard, achieving specific function.

Microduino-Cube-S1

Application

• You can download the test example, and combine OLED to test two analogy of Microduino-Cube-S1, test program：

https://github.com/Microduino/Microduino_Tutorials/commit/b0e0fe74269ee0f6a886d8fa8db497ec57cc4073

• Prepared hardware：Microduino FT232R, Microduino Core, Microduino-Cube-S1, Microduino OLED；
• Prepared software：Microduino example program (Arduino part), Arduino IDE(1.0 release and upper)；
• Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", download directly;
• After download, OLED displays "No button is pressed ",
  • Press the left button, OLED displays "Press the left button" which means the left button was pressed；
  • Press the right button, OLED displays "Press the rignt button" which means the right button was pressed；
  • If no button was pressed, OLED displays "No button is pressed ", the same state with initial state.

Bug

History

Picture

Front

Microduino-Cube-S1 Front

Back

Microduino-Cube-S1 Back

Video