Difference between revisions of "Microduino-Module nRF"

Microduino-nRF24

Microduino-nRF24 uses the newest 2.4GHz transceiver nRF24L01 from Nordic Semiconductor. This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401A and add some extra pipelines, buffers, and an auto-retransmit feature.

Designers can use Microduino-nRF24 in project without any wireless design , and just need to stack it with Microduino-Core or Microduino-Core+ through UPin-27, the standard Microduino interface will attach nRF24 and MCU with SPI bus, on transferring data.

Microduino-nRF24 works in the 1.9 to 3.6v voltage, the on-chip DC-DC regulator will automatically step down supply voltage to proper level.

Note: We now populate these boards with the nRF24L01+. The '+' version of the IC has improved range, sensitivity, and data rates. The command set is backward compatible with the original nRF24L01.

Features

• Worldwide license-free 2.4GHz ISM band operation
• Using the U-Shape 27-pin interface (UPin-27), the standard interface of Microduino
• Delivered ready to plug in.
• 2.54mm (0.1 inch) pin pitch, compatible to bread board and hole board

Specifications

• Auto Acknowledge
• Auto Re-Transmit
• 100m Range at 250kbps
• 250kbps to 2Mbit Data Rate
• 32 Byte separate TX and RX FIFOs
• Software selectable channel from 2400MHz to 2525MHz (125 Selectable channels)
• 1Mbps and 2Mbps on-air data-rate
• Enhanced ShockBurst? hardware protocol accelerator

Pin Description

Microduino-nRF24 Spec

Documents

• Snapshot of Microduino-nRF24 schematic
• Microduino-nRF24 Eagle source file 【download】
• Microduino-nRF24 main chips and devices
  • Main chip: Datasheet of nRF24

Development

• Arduino IDE library and support
  • Microduino-nRF24 nRF24 network library github.com【download】
• Microduino-nRF24 workshops
  • 【Learn to use Microduino-nRF24】

Buy

• Buy Microduino-nRF24

History

Pictures

Microduino nRF24 Front

Microduino nRF24 Back