Difference between revisions of "Microduino-Module CoreUSB"

From Microduino Wiki
Jump to: navigation, search
(Development)
(Development)
Line 142: Line 142:
 
* Program Microduino BootLoader
 
* Program Microduino BootLoader
 
** If BootLoader is damaged, you need to use Arduino UNO or existing Microduino to program bootloader to the damaged Microduino ;
 
** If BootLoader is damaged, you need to use Arduino UNO or existing Microduino to program bootloader to the damaged Microduino ;
**Players can refer to: '''[[Do you know how to use Arduino UNO to program bootloader to Microduino-Core?]]'''。
+
**Players can refer to: '''[[ Do you know how to use Arduino UNO to program bootloader to Microduino-Core?.]]'''。
  
 
==Application==
 
==Application==

Revision as of 03:10, 15 May 2016

Language: English  • 中文
Microduino-CoreUSB

Microduino-CoreUSB 8-bit microcontroller development board with the ATMEGA32U4 series as the core,and it is a open-source controller module compatible with Arduino Leonardo.

The difference between Microduino-CoreUSB and Microduino-core and Microduino-core+ is that the Microduino-CoreUSB contains a microcontroller and USB communication, equivalent to (Microduino-core + Microduino-USBTTL), and its pins conform to the microduino specification. Microduino uses java , the development environment of C language, same with Arduino. Players can use Arduino IDE, cooperating with software such as Flash or Processing , with Microduino and other electronic components,modules and sensors to make many funny interactive works.

Features

  • It contains microcontroller and USB communication, so you can directly download programs through the USB port, having no more need of Microduino-USBTTL;
  • USB overcurrent protection;
  • Small, cheap, stackable, and open;
  • Open-source hardware circuit design, and programming development environment compatible with Arduino ;
  • Same with Arduino, Microduino can use ISP download way, to program to「bootloader」 flexibly;
  • Unified Microduino interface specification, and abundant peripheral modules, can be connected and extended quickly, conveniently, and flexibly with other modules and sensors conforming to the Microduino interface specification;
  • 2.54 spacing Female Header interface is convenient to integrate into the hole plate.

Specification

Flash 32 KB(ATMEGA32U4). 4 KB during it is used to guide the program.
SRAM 2.5 KB(ATMEGA32U4)
EEPROM 1 KB(ATMEGA32U4)
Clock speed 16 MHz


  • Digital I/O There are 22 digital input/output terminals:
    • Labeled on the module of D0~D13, and A0~A7.
  • Analog I/O There are 10 analog input/output:
    • Labeled on thee module of A0,A1,A2,A3,A6,A7,D8(A8),D9(A9),D3(A10) and D4(A11);
    • Each offers a 10-bit resolution( that is 0~1024). By default, the measurement range of the analog voltage is the value from GND to VCC;
    • Please refer toanalogRead() function.
  • PWM support. There are 8:
    • Labeled on the module of respectively SCL,D3,D4,D5,D6,D7,D8 and D9.
    • Please refer toanalogWrite() function.
  • Serial port support. There are 2:
    • USB virtual serial port Serial;
    • Labeled on the module of Serial1[D0(RX),D1(TX)]。
  • SPI support. There is one:
    • Labeled on the module of D13(SCK),D12(MISO),D11(MOSI),D10(SS).
  • I2C support. There is one:
    • Labeled on the module of SDA(D18),SCL(D19).
  • External interrupt support. There are 5:
    • Labeled on the module of SCL(interrupt0), SDA(interrupt1), D0(interrupt2), D1(interrupt3), and D2(interrupt4).
    • Please refer toattachInterrupt() function.
  • Support the ISP download function.
  • Support AREF end.
  • Instruction of the pins:
Pin Original Pin Name Map Pin Name Digital Pin Analog Pin interrupt PWM Serial SPI I2C Power
1 VCC +5V +5V
2 VCC +3V3 +3.3V
3 (OC0A/OC1C/#RTS)PB7 D7 D7 yes
4 (OC1B/0C4B/ADC13)PB6 D8 D8 A8 yes
5 (OC1A/#OC4B/ADC12)PB5 D9 D9 A9 yes
6 (SS)PB0 D10 D10 SS
7 (PDI/MOSI)PB2 D11 D11 MOSI
8 (PDO/MISO)PB3 D12 D12 MISO
9 (SCK)PB1 D13 D13 SCK
10 AREF AREF
11 (ADC7/TDI)PF7 A0 D14 A0
12 (ADC6/TDO)PF6 A1 D15 A1
13 (ADC5/TMS)PF5 A2 D16 A2
14 (ADC4/TCK)PF4 A3 D17 A3
15 (SDA/INT1)PD1 SDA D18 1 SDA
16 (OC0B/SCL/INT0)PD0 SCL D19 0 yes SCL
17 (ADC1)PF1 A6 D20 A6
18 (ADC0)PF0 A7 D21 A7
19 (RXD1/AIN1/INT2)PD2 D0 D0 2 1(RX)
20 (TXD1/INT3)PD3 D1 D1 3 1(TX)
21 (INT6/AIN0)PE6 D2 D2 4
22 (T1/#OC4D/ADC9)PD6 D3 D3 A10 yes
23 (T0/OC4D/ADC10)PD7 D4 D4 A11 yes
24 (OC3A/#OC4A)PC6 D5 D5 yes
25 (ICP3/CLK0/OC4A)PC7 D6 D6 yes
26 RESET RST
27 GND GND GND


Microduino-Core32U4-Pinout
Microduino-Core32U4-Pinout
Microduino-Core32U4-Pinout
Microduino-Core32U4-Pinout

Document

Eagle PCB File:Microduino-core32U4.zip

Development

  • 1.Downloading programs to Microduino-CoreUSB , players need to use Microduino-USBTTL module.
  • 2.The tutorial of setting the development environment and installing the driver is as following:

Application


FAQ

  • Can this module be used together with Microduino-GPRS/GSM?
    • Yes, it can.

Purchase

History

Microduino-Core32U4

Map storage

Frontage

Microduino-Core32U4 Front

Backface

Microduino-Core32U4 Back

Video