Difference between revisions of "Template:Sensor explain"

Latest revision as of 07:49, 19 September 2016

Pins of the sensor:
- PIN1: GND
- PIN2: VCC
- General signal pins:
  - PIN3(IO1): digital/analog signal
  - PIN4(IO2): NC(null)
- Special signal pins:
  - If it is IIC: IO1/IO2 are respectively SDA/SCL.
  - If it is soft serial port: IO1/IO2 are respectively tx/rx.

Special to A sensor pins
- PIN1: GND
- PIN2: VCC
- PIN3(IO1): pin mode
- PIN4(IO2): pin mode

Microduino sensor can communicate with core module through the connection with Microduino-Module Sensor Hub.

@@ Line 1: / Line 1: @@
-Sensor backpin.png
+{| border="0" cellpadding="10" width="100%"
-传感器的引脚：
+|-
-PIN1：GND
+|width="20%" valign="top" align="left"|
-PIN2：VCC
+[[file:sensor_backpin.png|130px|left]]
-一般信号引脚：
+|width="40%" valign="top" align="left"|
-PIN3(IO1)：数字信号/模拟信号
+*'''Pins of the sensor''':
-PIN4(IO2)：NC(空)
+**PIN1: '''GND'''
-特殊信号引脚：
+**PIN2: '''VCC'''
-IIC引脚：IO1为SDA,IO2为SCL
+**General signal pins:
-软串口引脚：IO1为软串口tx,IO2为软串口rx
+***PIN3(IO1): '''digital/analog signal'''
-针对Sensor-Hall/zh传感器引脚
+***PIN4(IO2): '''NC(null)'''
-PIN1：GND
+**Special signal pins:
-PIN2：VCC
+***If it is IIC: '''IO1/IO2 are respectively SDA/SCL'''.
-PIN3(IO1)：模拟信号输入
+***If it is soft serial port: '''IO1/IO2 are respectively tx/rx'''.
-PIN4(IO2)：NC
+|width="40%" valign="top" align="left"|
+*<div class="nameA">Special to '''{{{nameA|A}}} sensor pins'''</div>
+**PIN1: '''GND'''
+**PIN2: '''VCC'''
+**<div class="modeA">PIN3(IO1): '''{{{modeA|pin mode}}}'''</div>
+**<div class="modeB">PIN4(IO2): '''{{{modeB|pin mode}}}'''</div>
-Microduino传感器可通过连接Microduino-Module Sensor Hub/zh来和核心模块通讯。
+Microduino sensor can communicate with core module through the connection with [[Microduino-Module Sensor Hub]].
+|}