Difference between revisions of "Microduino GPS recorder-306KIT"
(→Result) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 74: | Line 74: | ||
==Note== | ==Note== | ||
| − | *Before download the program, please make sure the jumper connection firstly，detailed information refer | + | *Before download the program, please make sure the jumper connection firstly，detailed information refer to：[[Microduino-GPS]] |
*Debugging need in the open area. | *Debugging need in the open area. | ||
==Video== | ==Video== | ||
| − | + | ||
|} | |} | ||
Latest revision as of 10:13, 26 July 2016
| Language: | English • 中文 |
|---|
OutlineProject：Microduino GPS Recorder Objective：Adopt the Microduino GPS module to acquire the geographic information and store it into Microduino-SD. Difficulty：Elementary Time-consuming：2 hours Maker：Microduino Studio-YLB | ||||||||||||||||||
Bill of Materials
| ||||||||||||||||||
Document | ||||||||||||||||||
DebugStep 1：Build the hardware Stack all the modules. Just put the GPS antenna outside, or it can not receive the signal. | ||||||||||||||||||
|
Step 2：Download the program If wanting to keep the default jumper (RX0、TX1), you need to unplug the Microduino NEO-6M during the download； Step 3：Debug Find an open area to debug for better signal. The current status of the module can be judged by the PPS indicator: lighting, indicates that the module has started to work, but hasn't achieved position information. Flashing (100ms off, 900ms on), means that the module has been successfully positioned. | ||||||||||||||||||
ResultYou can see the parameters after acquiring the positioning information and you can also record the data into the memory card.
| ||||||||||||||||||
Note
Video |
