Difference between revisions of "STM32 Core: Module Specifications"
From Microduino Wiki
(→Pinout) |
|||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 2: | Line 2: | ||
[[Microduino-CoreSTM32]] | [[Microduino-CoreSTM32]] | ||
| − | The Core STM32 is based on ST's STM32F103CBT6 microcontroller, also used in LeafLabs' | + | The Core STM32 is based on ST's STM32F103CBT6 microcontroller, also used in LeafLabs'. However, note that the connections from the STM32's pins to the Arduino I/O's (D0-13, A0-A7) don't match the way the Mini is connected. |
== Pinout == | == Pinout == | ||
| Line 40: | Line 40: | ||
| D5 | | D5 | ||
| PA13 | | PA13 | ||
| − | | SWDIO | + | | SWDIO, JTMS |
| | | | ||
|- | |- | ||
| D6 | | D6 | ||
| PA14 | | PA14 | ||
| − | | SWCLK | + | | SWCLK, JTCK |
| | | | ||
|- | |- | ||
| D7 | | D7 | ||
| PA15 | | PA15 | ||
| − | | TMR2_CH1 | + | | TMR2_CH1, JTDI |
| | | | ||
|- | |- | ||
| D8 | | D8 | ||
| PB3 | | PB3 | ||
| − | | TMR2_CH2, SPI1_SCK | + | | TMR2_CH2, SPI1_SCK, JTDO |
| | | | ||
|- | |- | ||
| D9 | | D9 | ||
| PB4 | | PB4 | ||
| − | | TM3_CH1 | + | | TM3_CH1, JNTRST |
| | | | ||
|- | |- | ||
| Line 105: | Line 105: | ||
| SDA | | SDA | ||
| PB7 | | PB7 | ||
| − | | | + | | I2C1_SDA, TMR4_CH2 |
| Not an analog input | | Not an analog input | ||
|- | |- | ||
| SCL | | SCL | ||
| PB6 | | PB6 | ||
| − | | | + | | I2C1_SCL, TMR4_CH1 |
| Not an analog input | | Not an analog input | ||
|- | |- | ||
Latest revision as of 09:10, 15 June 2016
| Language: | English • 中文 |
|---|
The Core STM32 is based on ST's STM32F103CBT6 microcontroller, also used in LeafLabs'. However, note that the connections from the STM32's pins to the Arduino I/O's (D0-13, A0-A7) don't match the way the Mini is connected.
Pinout
Please note this is UNOFFICIAL information, see discussion page
| Upin27 pin | STM32 port | Other functions | Notes |
|---|---|---|---|
| Rx0 | PA10 | USART1_RX, TMR1_CH3 | |
| Tx1 | PA9 | USART1_TX, TMR1_CH2 | |
| D2 | PB11 | USART3_RX, I2C2_SDA | |
| D3 | PB10 | USART3_TX, I2C2_SCL | |
| D4 | PA8 | TMR1_CH1 | On board LED, 1 = LED on |
| D5 | PA13 | SWDIO, JTMS | |
| D6 | PA14 | SWCLK, JTCK | |
| D7 | PA15 | TMR2_CH1, JTDI | |
| D8 | PB3 | TMR2_CH2, SPI1_SCK, JTDO | |
| D9 | PB4 | TM3_CH1, JNTRST | |
| D10 | PA4 | SPI1_NSS, ADC_IN4 | |
| D11 | PA7 | SPI1_MOSI, ADC_IN7, TMR3_CH2 | |
| D12 | PA6 | SPI1_MISO, ADC_IN6, TMR3_CH1 | |
| D13 | PA5 | SPI1_SCK, ADC_IN5 | |
| A0 | PA0 | ADC_IN0, TMR2_CH1 | |
| A1 | PA1 | ADC_IN1, TMR2_CH2 | |
| A2 | PA2 | USART2_TX, ADC_IN2, TMR2_CH3 | |
| A3 | PA3 | USART2_RX, ADC_IN3, TMR2_CH4 | |
| SDA | PB7 | I2C1_SDA, TMR4_CH2 | Not an analog input |
| SCL | PB6 | I2C1_SCL, TMR4_CH1 | Not an analog input |
| A6 | PB0 | ADC_IN8, TMR3_CH3 | |
| A7 | PB1 | ADC_IN9, TMR3_CH4 |
