Difference between revisions of "MCookie-CoreUSB"

From Microduino Wiki
Jump to: navigation, search
(→‎Specifications)
Line 4: Line 4:
 
|
 
|
 
[[File:mCookie-core32U4-rect.jpg|400px|thumb|right|Microduino-CoreUSB]]
 
[[File:mCookie-core32U4-rect.jpg|400px|thumb|right|Microduino-CoreUSB]]
−
mCookie-CoreUSB uses the ATMEGA32U4 series 8 bits MCU as the core, open source, and the Arduino Leonardo compatible controller module.
 
−
mCookie adopts the same Java/C development environment with Arduino. Users can use Arduino IDE with other software Flash or Processing as well as mCookie and other electronic components, modules and sensors to make lots of interesting products.
 
  
 +
mCookie-CoreUSB is a 8-bit microcontroller development core board with ATMEGA32U4 series as the core, which is an open source, Arduino Leonardo compatible controller module.
 +
mCookie adopts the same Java/C development environment with Arduino. Users can use Arduino IDE with other software Flash or Processing as well as mCookie and other electronic components, modules and sensors to make lots of interesting  and interactive works.
 +
  
 
==Features==
 
==Features==
  
−
*Contain the microcontroller and USB, use the USB to download and no need Microduino-FT232R anymore；
+
*Contain microcontroller and USB communication and enable to download programs via USB port.
−
*USB overcurrent protection ；
+
*USB overcurrent protecton.
−
*Small, cheap, stackable, opened platfrom;
+
*Small, stackable, economic and open source.
−
*Open source hardware circuit design, compatible with the Arduino IDE development environment for programming;
+
*Open source hardware circuit design and Arduino compatible development environment for programming.
−
*Use ISP download mode, burn bootloader easily；
+
*Uniform mCookie interface standard makes it easy and flexible to connect with other mCookie modules and sensors.  
−
*Define unified interface mCookie specification and contain rich peripheral modules, capable of having quick connection with other mCookie modules and sensors easily and flexibly.  
 
  
−
==Specifications==
+
==Specification ==
−
 
 
−
*Digital I/O port 0~13，A0~A5。
 
−
**On Microduino-Core32U4, the ports are RX0, TX1, D2~D13, A0~A5. 20 IO ports are defined as input/output port.
 
−
*Analog I/O analogy input port is A0~A5；
 
−
**Each port provides 10-bit resolution (that is 1024 values). By default, the measuring range of voltage is from the power supply voltage to GND.
 
−
*Supports eight PWM output ports that are SCl, 3, 4, 5, 6, 7, 8, 9；
 
−
*IIC interface, SDA, SCL；
 
−
*Supports ISP download function；
 
−
* Serial
 
−
** Serial: USB virtual serial port
 
−
** Serial1: RX0, TX1
 
−
*Five external interrupts:
 
−
**interrupt 0: SCL
 
−
**interrupt 1: SDA
 
−
**interrupt 2: D0
 
−
**interrupt 3: D1
 
−
**interrupt 4: D2
 
 
{|class="wikitable"
 
{|class="wikitable"
 
|-
 
|-
−
|Flash||32 KB（ATMEGA32U4）and 4KB is used to guide the program.
+
|Flash||32 KB (ATMEGA32U4)）and 4KB of which are used for guide the program.
 
|-
 
|-
−
|SRAM||2.5 KB（ATMEGA32U4）
+
|SRAM||2.5 KB (ATMEGA32U4)
 
|-
 
|-
−
|EEPROM||1 KB（ATMEGA32U4）
+
|EEPROM||1 KB (ATMEGA32U4)
 
|-
 
|-
−
|Clock frequency||16 MHz
+
|Clock Frequency0||16 MHz
 
|}
 
|}
  
  
−
*Pin Description:  
+
*Twenty two digital I/O ports:
 +
** Marked on the module as D0-D13 and A0-A7.
 +
* Ten analog I/O ports: 
 +
** Marked on the module as A0,A1,A2,A3,A6,A7,D8(A8),D9(A9),D3(A10) and D4(A11).
 +
** Each port provides a 10-bit resolution (0-1024). By default, the measuring range of voltage is the voltage values from GDN to VCC. 
 +
** For more information, please refer to: '''[http://www.arduino.cc/en/Reference/AnalogRead analogRead()]''' .
 +
* Support eight PWM output ports:　
 +
** Marked on the module as SCL,D3,D4,D5,D6,D7,D8 and D9.
 +
** For more information, please refer to:'''[http://www.arduino.cc/en/Reference/AnalogWrite analogWrite()]'''.
 +
* Support two serial ports:
 +
** USB analog Serial USB
 +
** Marked as Serial1[D0(RX) and D1(TX)]。
 +
* Support SPI:
 +
** Marked as D13(SCK),D12(MISO),D11(MOSI) and D10(SS).
 +
* Support I2C:
 +
** Marked as SDA(D18) and SCL(D19)。
 +
* External input:
 +
** Marked as SCL(interrupt0),SDA(interrupt1),D0(interrupt2),D1(interrupt3) and D2(interrupt4).
 +
** For more information, please refer to: '''[http://arduino.cc/en/Reference/AttachInterrupt attachInterrupt()]'''.
 +
* Support ISP download.
 +
 
 +
 
 +
*Pin Descrliption:  
  
 
{|class="wikitable"
 
{|class="wikitable"
Line 80: Line 85:
 
| 9||(SCK)PB1||D13||D13||||||||||SCK||||
 
| 9||(SCK)PB1||D13||D13||||||||||SCK||||
 
|-
 
|-
−
| 10||AREF||Exterior power supply||||||||||||||||
+
| 10||AREF||Exterior power||||||||||||||||
 
|-
 
|-
 
| 11||(ADC7/TDI)PF7||A0||D14||A0||||||||||||
 
| 11||(ADC7/TDI)PF7||A0||D14||A0||||||||||||
Line 118: Line 123:
  
 
==Document==
 
==Document==
−
 
+
[[File:mCookie-CoreUSB-pin.jpg|center|600px]]
  
 
==Development==
 
==Development==

Revision as of 07:33, 11 March 2016

Language: English  • 中文
Microduino-CoreUSB

mCookie-CoreUSB is a 8-bit microcontroller development core board with ATMEGA32U4 series as the core, which is an open source, Arduino Leonardo compatible controller module. mCookie adopts the same Java/C development environment with Arduino. Users can use Arduino IDE with other software Flash or Processing as well as mCookie and other electronic components, modules and sensors to make lots of interesting and interactive works.


Features

  • Contain microcontroller and USB communication and enable to download programs via USB port.
  • USB overcurrent protecton.
  • Small, stackable, economic and open source.
  • Open source hardware circuit design and Arduino compatible development environment for programming.
  • Uniform mCookie interface standard makes it easy and flexible to connect with other mCookie modules and sensors.

Specification

Flash 32 KB (ATMEGA32U4)）and 4KB of which are used for guide the program.
SRAM 2.5 KB (ATMEGA32U4)
EEPROM 1 KB (ATMEGA32U4)
Clock Frequency0 16 MHz


  • Twenty two digital I/O ports:
    • Marked on the module as D0-D13 and A0-A7.
  • Ten analog I/O ports:
    • Marked on the module as A0,A1,A2,A3,A6,A7,D8(A8),D9(A9),D3(A10) and D4(A11).
    • Each port provides a 10-bit resolution (0-1024). By default, the measuring range of voltage is the voltage values from GDN to VCC.
    • For more information, please refer to: analogRead() .
  • Support eight PWM output ports:　
    • Marked on the module as SCL,D3,D4,D5,D6,D7,D8 and D9.
    • For more information, please refer to:analogWrite().
  • Support two serial ports:
    • USB analog Serial USB
    • Marked as Serial1[D0(RX) and D1(TX)]。
  • Support SPI:
    • Marked as D13(SCK),D12(MISO),D11(MOSI) and D10(SS).
  • Support I2C:
    • Marked as SDA(D18) and SCL(D19)。
  • External input:
    • Marked as SCL(interrupt0),SDA(interrupt1),D0(interrupt2),D1(interrupt3) and D2(interrupt4).
    • For more information, please refer to: attachInterrupt().
  • Support ISP download.


  • Pin Descrliption:
Pin Original Pin Name Map Pin Name Digital Pin Analog Pin interrupt PWM Serial SPI I2C Power
1 VCC +5V +5V
2 VCC +3V3 +3.3V
3 (OC0A/OC1C/#RTS)PB7 D7 D7 yes
4 (OC1B/0C4B/ADC13)PB6 D8 D8 A8 yes
5 (OC1A/#OC4B/ADC12)PB5 D9 D9 A9 yes
6 (SS)PB0 D10 D10 SS
7 (PDI/MOSI)PB2 D11 D11 MOSI
8 (PDO/MISO)PB3 D12 D12 MISO
9 (SCK)PB1 D13 D13 SCK
10 AREF Exterior power
11 (ADC7/TDI)PF7 A0 D14 A0
12 (ADC6/TDO)PF6 A1 D15 A1
13 (ADC5/TMS)PF5 A2 D16 A2
14 (ADC4/TCK)PF4 A3 D17 A3
15 (SDA/INT1)PD1 SDA D18 1 SDA
16 (OC0B/SCL/INT0)PD0 SCL D19 0 yes SCL
17 (ADC1)PF1 A6 D20 A6
18 (ADC0)PF0 A7 D21 A7
19 (RXD1/AIN1/INT2)PD2 D0 D0 2 1(RX)
20 (TXD1/INT3)PD3 D1 D1 3 1(TX)
21 (INT6/AIN0)PE6 D2 D2 4
22 (T1/#OC4D/ADC9)PD6 D3 D3 A10 yes
23 (T0/OC4D/ADC10)PD7 D4 D4 A11 yes
24 (OC3A/#OC4A)PC6 D5 D5 yes
25 (ICP3/CLK0/OC4A)PC7 D6 D6 yes
26 RESET RST
27 GND GND GND

Document

MCookie-CoreUSB-pin.jpg

Development

Projects

MCookie_(Microduino Compatible）Tutorial


FQA

Purchase

History

Microduino-CoreUSB

Pictures

MCookie-CoreUSB-F.JPG
MCookie-CoreUSB-b.JPG
MCookie-CoreUSB-F1.JPG
MCookie-CoreUSB-b1.JPG

Video

Retrieved from "https://wiki.microduinoinc.com/index.php?title=MCookie-CoreUSB&oldid=11832"