Difference between revisions of "MCookie-Audio"

mCookie-Audio

mCookie-Audio is an audio play module with serial communication. It uses memory card to save songs to Audio Shield and amplifies sound together with mCookie-Amplifier. Audio and Audio shield stacked can be stacked to computer and serves as a card reader, which can be used for file transmission.

Features

• Adopt serial port control with default serial (D2,D3). Serial port can be selected by jumpers: Serial (D0, D1), soft serial port(D4, D5).
• Allow external memory card connection and play as well as disk display while connecting with a computer and content update.

Specification

• MP3 format:
• Support asynchronous serial communication mode and receive commands sent from the upper computer by serial port:
  • Communication standard: 9600 bps 、
  • Data bit:1
  • Check bit: none
  • Flow control: none
• Support FAT16 and FAT32 system as well as 32G memory card to the maximum
• With broadcast language insertion function, you can pause the playing background music.
• Audio data is sorted by folders with 100 folders at the most supportable. Each folder can be sorted with 1000 pieces of music.
• 30-level volume adjustable (0x00-0x1E)
• * Support Play, Pause, Last one, Next one and Play certain audio

Document

JQ6500 audio chip description: File:JQ6500.pdf

Development

Copy music to Audio shield

• Insert memory card into Audio shield

• Stack Audio shield and Audio and connect them to your computer via a USB cable. And you'll see a disk on the computer.

• Copy songs to the disk.

Dial Wheel Button Control

• Hardware needed: mCookie-CoreUSB, mCookie-OLED, mCookie-Amplifier, mCookie-Audio, Audio shield, mCookie-BM, mCookie-BM shield, two loudspeakers and two cells of battery;
• Code example download: File:Music Text.zip
• Connect CoreUSB to your computer, start Arduino IDE and open example program.
• Click and upload program. When you see "Uploaded", it means the program has been uploaded to CoreUSB successfully.

Program description: " audio.h " is audio file control, responsible for sending control instruction to Audio module. 1. Under default serial port, you can select communication serial port from " audio.h " based on the core modules you use.

//#define AUDIO_PORT Serial1    
#define AUDIO_PORT mySerial

2. Initialize Audio module and select play mode.

#define MODE_loopAll 0  //Loop all the time 
#define MODE_loopOne 1  //Loop once 
#define MODE_One_STOP 2 //Single cycle 
#define MODE_One_END  4 //Play once

• Insert TF card to Audio Sheild slot.
• Stack AudioSheild and Audio, connect the Audio to your computer, and then you can save songs to TF card. Here we can save nine songs.
• Connect loudspeaker to the interface of Amplifier.

• Stack Amplifier, Audio and AudioSheild. (Only these three modules need to be connected together. Not for the other modules.)

• Connect the battery pack to the BM module.

• Stack the other modules and connect them to BM shield. Then you can system power supply.
  • Audio must be powered through BM and it cannot powered by computer via CoreUSB, otherwise, it may cause system breakdown.

• Operation Description:

Projects

It can be widely used in all kinds of voice broadcast:

• Car navigation voice broadcast
• Road transport inspection and toll station voice prompt;
• Railway station and bus station security inspection voice prompt;
• Electricity, communication and financial business office voice prompt;
• Vehicle entry and exit channel verification voice prompt;
• Public security frontier inspection channel voice prompt;
• Multi-channel voice alarm or device operation guide voice;
• Electric sight-seeing car safe driving voice prompt;

Purchase

History

Pictures

Audio&&shield-SD

Audio&&shield-SD

Audio&&shield-SD

Video