Difference between revisions of "Microduino NRF communication-201KIT"

From Microduino Wiki
Jump to: navigation, search
(→‎Bill of Materials)
Line 4: Line 4:
 
|
 
|
 
==Outline==
 
==Outline==
−
*Project：Microduino nrf24 communication
+
*Project: Microduino nrf24 communication
−
*Objective：To have a wireless control of the LED light via Microduino-NRF24.  
+
*Objective: To have a wireless control of the LED light via Microduino-NRF24.  
−
*Difficulty：Elementary
+
*Difficulty: Elementary
−
*Time-consuming：Half an hour
+
*Time-consuming: Half an hour
−
*Maker：Microduino Studio-YLB
+
*Maker: Microduino Studio-YLB
  
 
==Bill of Materials==
 
==Bill of Materials==
Line 48: Line 48:
 
|-
 
|-
 
|
 
|
−
Prepare master module：
+
Prepare master module:
 
Microduino-Core+, Microduino-FT232R, Microduino-nRF24, a button and a bread board
 
Microduino-Core+, Microduino-FT232R, Microduino-nRF24, a button and a bread board
 
|-
 
|-
 
|
 
|
−
Prepare slave module：
+
Prepare slave module:
 
Microduino-Core, Microduino-NRF24,Microduino Duo-V and an LED
 
Microduino-Core, Microduino-NRF24,Microduino Duo-V and an LED
 
|-
 
|-
 
|
 
|
−
*Setp 2：Set up the button
+
*Step 2: Set up the button
−
Button connection：Adopt internal pullup. (You need to define it in program.)
+
Button connection: Adopt internal pull up. (You need to define it in program.)
  
 
[[File:201KIT-button.jpg|600px|center|thumb|201KIT-button]]
 
[[File:201KIT-button.jpg|600px|center|thumb|201KIT-button]]
Line 63: Line 63:
 
|-
 
|-
 
|
 
|
−
The whole system picture：
+
The whole system picture:
 
[[File:201KIT-system.jpg|600px|center|thumb|201KIT]]
 
[[File:201KIT-system.jpg|600px|center|thumb|201KIT]]
 
|-
 
|-
 
|
 
|
−
*Setp 3：Download the example program
+
*Step 3: Download the example program
  
−
Download the program：
+
Download the program:
 
|-
 
|-
 
|
 
|

Revision as of 08:43, 13 September 2016

Language: English  • 中文

Outline

  • Project: Microduino nrf24 communication
  • Objective: To have a wireless control of the LED light via Microduino-NRF24.
  • Difficulty: Elementary
  • Time-consuming: Half an hour
  • Maker: Microduino Studio-YLB

Bill of Materials

  • Microduino equipment
Module Number Function
Microduino-Core+/Microduino-Core 1 Used as a master machine to send the control signal
Microduino-Core 1 Used as a slave machine to receive the control signal
Microduino-USBTTL(FT232R) 1 For program download
Microduino-nRF24 2 For wireless communication
  • Other equipment
Button 1 For function selection
LED 1 For displaying communication status
bread board 1 For circuit buildup
Jumper 1 For circuit connection
  • Module

For ease of debugging and lowering the height of the module combination, here we need an extension board Microduino-Duo-V1.

201KIT

Document

Debugging

  • Step 1：Set up the system

Prepare master module: Microduino-Core+, Microduino-FT232R, Microduino-nRF24, a button and a bread board

Prepare slave module: Microduino-Core, Microduino-NRF24,Microduino Duo-V and an LED

  • Step 2: Set up the button

Button connection: Adopt internal pull up. (You need to define it in program.)

201KIT-button

The whole system picture:

201KIT
  • Step 3: Download the example program

Download the program:

Choose "Microduino Core +(Atmega644P@16M,5V)" as the board of the master machine and "Microduino Core (Atmega328P@16M,5V)" as that of the slave machine, then download directly.

download-core
download-core+

Result

Just download the program to the core board and you can control the LED on the slave machine through the button on the master machine.

Note

  • The sending and receiving parameters of Microduino-NRF24's communication function should be matched.
  • The button adopts internal pullup, needed to be defined in program.
Retrieved from "https://wiki.microduinoinc.com/index.php?title=Microduino_NRF_communication-201KIT&oldid=1730"