Difference between revisions of "Main Page"

Microduino Core Modules (Arduino Compitable)

Microduino-Core

• Core board of Microduino series
• Main chip: ATmega328P/ATmega168PA
• Compatible with Arduino Uno, the same hardware architect as Uno.
• UPin-27: Microduino standard interface

Microduino-Core+ (Performance Edition)

• Core board of Microduino series
• Main chip: ATmega644PA/ATmega1284P
• As powerful as Arduino Mega2560
• 2 hardware serial ports, 10 more digital I/O
• UPin-27: Microduino standard interface

Microduino-Core32U4(Performance Edition)

• Core board of Microduino series
• Compatible with Arduino Uno
• Contain Microcontroller and USB
• UPin-27: Microduino standard interface

Microduino-FT232R

• Microduino USB2TTL module, connecting PC with Microduino, uploading program to Core/Core+.
• Main chip: FT232RL
• UPin-27: Microduino standard interface

Microduino Extension Modules

【Microduino-ENC28J60】 + 【Microduino-RJ45】 Ethernet module

• Main chip: ENC28J60
• Microduino ethnet module
• IEEE 802.3 compitable ethernet controller
• integrate MAC and 10 BASE-T PHY, support POE
• use SPI communication protocol
• UPin-27: Microduino standard interface

Microduino-nRF24

• Microduino 2.4G wireless module
• use SPI communication protocol
• Arduino library support

Microduino-【BT】

• Microduino Shield BT, two versions are provided: BT2.1 and BT4.0
• support BT 2.1/4.0 protocol
• use hardware serial or software serial ports (optional)
• UPin-27: Microduino standard interface

Microduino-SD

• Microduino Micro SD card jack
• use SPI communication protocol
• UPin-27: Microduino standard interface

Microduino-BM

• Microduino Li-ion battery management module
• full functions of charge, discharge, voltage dectect and LED indicator
• DC-DC convert, support 3.7->5.V and 3.7V->3.3V.
• UPin-27: Microduino standard interface

Microduino-10DOF

• Microduino 10 DOF sensor module
• MPU6050 + HMC5883L + BMP085
• use I2C protocol
• UPin-27: Microduino standard interface

Microduino-OLED

• Microduino OLED 12864 display module, 0.96'
• SSD1306 driver
• use I2C protocol
• supply voltage: 3.3V

Microduino-RTC

• Microduino RTC Module
• PCF8563 CMOS Real-Time Clock (RTC)
• Two Wire Interface (I²C)
• Backup by additional EEPROM AT24C32

Microduino-NEO-6M

• Microduino GPS Module
• Core modules using UBLOX NEO-6M
• Use serial to communicate with Core module
• UPin-27: Microduino standard interface

Microduino-LM4863

• Microduino D-Class Amplifier Module
• Based on LM4863 Chip
• 2.54 Pin Interface
• UPin-27: Microduino standard interface

Microduino-CC3000

• Microduino WiFi Module
• Base on TI CC3000 IEEE 802.11b/g solution
• Use the SPI interface to communicate to Core module
• UPin-27: Microduino standard interface

Microduino-A4982

• Microduino Motor/Stepper Driver Module
• Support four-wire two-phase stepper motor
• The unique plug way more space saving

Microduino-A3906

• Microduino DC Motor Driver Module
• Can drive two DC Motors
• The unique plug way more space saving

Microduino-USBHOST

• Microduino USB communication module
• Support USB host controller and USB peripherals
• UPin-27 Microduino standard interface

Microduino-GPRS/GSM

• Microduino GPRS/GSM module
• Send, Receive short message
• Access the network using SIM card

Microduino Extension Boards

Microduino-Solo

• Microduino shield board for sensors

Microduino-Duo-v

• Microduino Duo boards extension

Microduino-Duo-h

• Microduino Duo boards extension

Microduino-Uno

• Microduino shield board for Arduino pin-out

Microduino Cube Extension Board

Microduino-Cube-S1

• Compatible with Arduino Uno Pin and UPIN27 interface

Microduino-Cube-V1

• Compatible with Arduino Uno Pin and UPIN27 interface

Microduino-Weatherstation

• Compatible with Arduino Uno Pin and UPIN27 interface

Microduino Start

• [1]【Arduino IDE Driver Install】 for Microduino-Core/Core+
• [2]【Arduino IDE Microduino Configuration】 for Microduino-Core/Core+
• [3]【Burn Bootloader to Microduino-Core/Core+ with an Arduino】 to initialize Microduino-Core/Core+

Microduino Basic Tutorial

• Lesson 1--LED flashes experiments (using bread board)
• Lesson 2--Multiple led flashes experiments
• Lesson 3--Button switch control LED
• Lesson 4--The button PWM control of LED brightness
• Lesson 5--The potentiometer PWM control of LED brightness
• Lesson 6--The Program PWM control of LED brightness --Breathing light
• Lesson 7--Control the color of RGB LED
• Lesson 8--Pulse timing (check how long you hold down the switch)
• Lesson 9--Microduino used as 0-5V range voltmeter (simulate a multimeter)
• Lesson 10--The first pegboard experiments (using electric iron)
• Lesson 11--Microduino "The lamp of Da Vinci（light-sensitive experiments）"
• Lesson 12--Microduino "Light indicator"
• Lesson 13--Microduino "Light alarm (DIY a phototransistor by yourself)"
• Lesson 14--Microduino "A simple thermometer"
• Lesson 15--Microduino "Make sense of warm cup circuit"
• Lesson 16--Microduino "Fingertip switch (transistor trigger)"
• Lesson 17--Microduino "Buzzer alarm"
• Lesson 18--Microduino "Make a flood water level alarm model"
• Lesson 19--Microduino "Sampling ADC of internal reference source"
• Lesson 20--Microduino "Use Interrupt"
• Lesson 21--Microduino "Use Timer Interrupt"
• Lesson 22--Microduino "Serial port debugging"
• Lesson 23--Microduino "Serial port receives string and translated into an array"

Microduino Intermediate Tutorial

• Lesson 1--Microduino Resistor Meter
• Lesson 2--Microduino OLED Usage
• Lesson 3--Microduino Digital voltmeter
• Lesson 4--Microduino Phone Dialer
• Lesson 5--Microduino Simulates Computer Keyboard
• Lesson 6--Microduino Simple Frequency Meter (serial monitor)
• Lesson 7--Microduino Drive servo (no library)
• Lesson 8--Microduino Infrared Transmitting and Receiving
• Lesson 9--Microduino Infrared Transcoding
• Lesson 10--Microduino Ultrasonic Ranging
• Lesson 11--Microduino Infrared Controls Servo Angle
• Lesson 12--Microduino 74HC595 Cascade and Serial input Parallel ouput Data
• Lesson 13--Microduino Single Digital Display with A Point
• Lesson 14--Microduino Digital Tube Experiment 1 - Digital Dice
• Lesson 15--Microduino Digital Tube Experiment 2 - Control Potentiometer
• Lesson 16--Microduino Digital Tube Experiment 3 - Display Infrared Remote Control Button Value
• Lesson 17--Microduino Button Control Digital Tube
• Lesson 18--Microduino 4-way Responder
• Lesson 19--Microduino Two Digital Tube Static Display
• Lesson 20--Microduino Two Digital Tube Countdown Display
• Lesson 21--Microduino Four Digital Tube Static Display
• Lesson 22--Microduino Four Digital Tube Dynamic Display
• Lesson 23--Microduino Digital Tube Clock
• Lesson 24--Microduino Digital Tube Thermometer
• Lesson 25--Microduino 5*7 Lattice Static Display
• Lesson 26--Microduino 5*7 Lattice Dynamic Display
• Lesson 27--Microduino 8*8 Lattice Static Display
• Lesson 28--Microduino 8*8 Lattice Transverse Move Display
• Lesson 29--Microduino 8*8 Lattice Longitudinal Move Display
• Lesson 30--Microduino 8*8 Lattice Animated Emoticon
• Lesson 31--Microduino 16*16 Lattice Character Static Display
• Lesson 32--Microduino 16*16 Lattice Character Transverse Move Display
• Lesson 33--Microduino 16*16 Lattice Character Longitudinal Move Display
• Lesson 34--Microduino 16*16 Lattice Character Animated Emoticon
• Lesson 35--Microduino EEPROM Reading and Writing Experiment
• Lesson 36--Microduino Infrared Remote Control Changes EEPROM values
• Lesson 37--Microduino Control Relay
• Lesson 38--Microduino Stepper Motor Drive
• Lesson 39--Microduino Stepper Motor Control steps
• Lesson 40--Microduino DC Motor Drive (Potentiometer PWM control speed)
• Lesson 41--Microduino Dc Motor Rotation Control
• Lesson 42--Microduino Motor Speed Measurement

Microduino KIT Example Tutorial

• Microduino NRF communication-201KIT
• Microduino BLE_IOS-202KIT
• Microduino CC3000 get weather information by internet -203KIT
• Microduino LM4863 Music player -301KIT
• Microduino Enc Wired network experiment -302KIT
• Microduino NRF Wireless Gateway based on Enc Gateway -304 KIT
• Microduino GPS recorder-306KIT

Microduino Standard Interface

Microduino standard interface (UPin-27) 800px Microduino series pinout summary

Microduino- D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 A0 A1 A2 A3 A4 A5 A6 A7 5V 3V3 GND RX TX MISO MOSI SCK SDA SCL Core RX TX IN Core+ RX0 TX0 RX1 TX1 IN FT232RL TX RX OUT OUT ENC28J60 IRQ CS SO SI SCK IN nRF24L01+ INT CSN CE SO SI SCK IN CC3000 IRQ EN CS DOUT DIN SCK IN SD CS D0 DI SCK CD IN BM OUT OUT 10DOF SDA SCL IN BT (TX) (RX) (TX) (RX) TX RX IN About This Wiki was built in 2013/June/11, there are 53 pages, 4,742 files uploaded and 19,107 revises. To learn more information, please visit Recent Changes.