Difference between revisions of "Microduino-Shield Cube-S1"

From Microduino Wiki
Jump to: navigation, search
(→‎Application)
(→‎Features)
Line 5: Line 5:
 
[[File:Microduino-S1-rect.jpg|400px|thumb|right|Microduino-Cube-S1]]
 
[[File:Microduino-S1-rect.jpg|400px|thumb|right|Microduino-Cube-S1]]
 
==Features==
 
==Features==
−
*Pin compatible with Arduino uno;；
+
*Compatible with the pin of Arduino Uno;
−
*2.54 pitch board is the base for Microduino module, the same name pin are connected to each other on board, easy to debug.
+
*Uniformed Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard;
−
*Define unified interface Microduino specification and contain rich peripheral modules. Set up the quick connection with other Microduino modules and sensors easily and flexibly;
+
*Onboard analog button and sensor interface;
−
*Onboard analog buttons, extended interface；
 
  
 
==Specification==
 
==Specification==

Revision as of 06:44, 15 August 2014

Language: English  • 中文
Microduino-Cube-S1

Features

  • Compatible with the pin of Arduino Uno;
  • Uniformed Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard;
  • Onboard analog button and sensor interface;

Specification

  • Electrical specifications
    • MicroUSB power supply；
    • 3.3V regular；
    • Select the 5V or 3.3V power via PWR jumper, default is 3.3V；
    • Onboard power supply (5V、PWR) indicator；
  • Extended pin
    • Onboard reset button；
    • OLED fixed base；
    • Two serial ports, RX0、TX0(Serial) and D2、D3(Serial1)；
    • Two IIC interfaces；
      • Two analogy button interfaces, and connect to A7；
    • Sensor interface can be combined by jumper, The player can make the connection by yoursefl, as follows：
      • PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND.
Microduino-Cube-S1
Microduino-Cube-S1-Pinout
Microduino-Cube-S1-Pinout

Document

Eagle PCB local downlaod Main components：

Development

It can be used with other Microduino modules, sensor to achieve specific functions.

Microduino-Cube-S1

Application

  • You can download the test example, and combine OLED to test two analogy of Microduino-Cube-S1, test program：

https://github.com/Microduino/Microduino_Tutorials/commit/b0e0fe74269ee0f6a886d8fa8db497ec57cc4073

  • Prepared hardware：Microduino FT232R, Microduino Core, Microduino-Cube-S1, Microduino OLED；
  • Prepared software：Microduino example program (Arduino part), Arduino IDE(1.0 release and upper)；
  • Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", download directly;
  • After download, OLED displays "No button is pressed ",
    • Press the left button, OLED displays "Press the left button" which means the left button was pressed；
    • Press the right button, OLED displays "Press the rignt button" which means the right button was pressed；
    • If no button was pressed, OLED displays "No button is pressed ", the same state with initial state.

Bug

History

Picture

Front

Microduino-Cube-S1 Front

Back

Microduino-Cube-S1 Back

Video

Retrieved from "https://wiki.microduinoinc.com/index.php?title=Microduino-Shield_Cube-S1&oldid=2673"