|
|
| Line 10: |
Line 10: |
| | | | |
| | ==Specification== | | ==Specification== |
| − | *Electrical specifications | + | *Electrical specification |
| | **MicroUSB power supply； | | **MicroUSB power supply； |
| − | **3.3V regular； | + | **3.3V constant voltage； |
| − | **Select the 5V or 3.3V power via PWR jumper, default is 3.3V； | + | **Select the 5V or 3.3V power via PWR jumper(The default voltage is 3.3V)； |
| − | **Onboard power supply (5V、PWR) indicator； | + | **Onboard power supply indicator(5V and PWR) ； |
| | | | |
| − | *Extended pin | + | *Extension |
| | **Onboard reset button； | | **Onboard reset button； |
| − | **OLED fixed base； | + | **The fixed OLED base； |
| − | **Two serial ports, RX0、TX0(Serial) and D2、D3(Serial1)； | + | **Two serial ports including (RX0,TX0)and (D2,D3)； |
| | **Two IIC interfaces； | | **Two IIC interfaces； |
| − | ***Two analogy button interfaces, and connect to A7； | + | ***Two analog button interfaces connected to A7； |
| − | **Sensor interface can be combined by jumper, The player can make the connection by yoursefl, as follows： | + | **The sensor interface can be selected and combined through jumpers： |
| − | ***PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND. | + | ***PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND (Users can make the connection as they like). |
| | | | |
| | [[file:Microduino-Cube-S1-Pinout1.jpg|800px|thumb|center|Microduino-Cube-S1]] | | [[file:Microduino-Cube-S1-Pinout1.jpg|800px|thumb|center|Microduino-Cube-S1]] |
Features
- Compatible with the pin of Arduino Uno;
- Uniformed Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard;
- Onboard analog button and sensor interface;
Specification
- Electrical specification
- MicroUSB power supply；
- 3.3V constant voltage；
- Select the 5V or 3.3V power via PWR jumper(The default voltage is 3.3V)；
- Onboard power supply indicator(5V and PWR) ；
- Extension
- Onboard reset button；
- The fixed OLED base；
- Two serial ports including (RX0,TX0)and (D2,D3)；
- Two IIC interfaces；
- Two analog button interfaces connected to A7；
- The sensor interface can be selected and combined through jumpers：
- PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND (Users can make the connection as they like).
 Microduino-Cube-S1-Pinout  Microduino-Cube-S1-Pinout Document
Eagle PCB local downlaod
Main components：
Development
It can be used with other Microduino modules, sensor to achieve specific functions.
Application
- You can download the test example, and combine OLED to test two analogy of Microduino-Cube-S1, test program：
https://github.com/Microduino/Microduino_Tutorials/commit/b0e0fe74269ee0f6a886d8fa8db497ec57cc4073
- Prepared hardware：Microduino FT232R, Microduino Core, Microduino-Cube-S1, Microduino OLED；
- Prepared software：Microduino example program (Arduino part), Arduino IDE(1.0 release and upper)；
- Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", download directly;
- After download, OLED displays "No button is pressed ",
- Press the left button, OLED displays "Press the left button" which means the left button was pressed；
- Press the right button, OLED displays "Press the rignt button" which means the right button was pressed；
- If no button was pressed, OLED displays "No button is pressed ", the same state with initial state.
Bug
History
Picture
Front
Back
Video
|
