Difference between revisions of "Setup Guide on Mac OS X"

Equipment

• Software：

Microduino software develop environment Arduino IDE, Microduino IDE configure pagckage;

• Hardware:

Microduino FT232R、Micro-USB cable；

Congfigure procedure

• Download Arduino IDE on

http://arduino.cc/en/Main/Software

Arduino IDE for Mac

• Uncompress the Arduino IDE package to Applications folder;

• Download and install the USB driver on

http://www.ftdichip.com/Drivers/VCP.htm

USB for Mac

• Download the Microduino hardware package

File:Microduino-hardware.zip

• Connect the Microduino FT323R to PC with the Micro-USB cable;

• Click the right button on "computer", then click "manager".

Microduino

• Then open the "Device Manager", you can see the uncognized hardward with a exclamation.

Microduino

• Click right button on un-recognized hardware, select update driver software. In the pop-up dialog, select search computer for driver software.

Microduino

• Then select the drivers directory in Aduirno IDE directory.

Note, if your computer reports that can't find the driver, need to be further positioning to the directory \drivers\FTDI USB Drivers

Microduino

• Click next, then install the driver.

Microduino

Microduino

• After the driver installed successfully, you can see the COM port.

Microduino

Please refer to: File:Mac microduino.pdf