Difference between revisions of "Joypad-Game-Tetris"

Outline

Use Microduino-Joypad-Game to play Tetris.

Bill of Material

• Microduino Equipment

Download

TFT library：https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Libraries/_01_Microduino_TFT_ST7735 Joypad lib.：https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Libraries/_08_Microduino_Shield_Joypad Code：https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Joypad/Microduino_JoyPad_Game/Microduino_JoyPad_teril

Debugging

• Step: Prepare Microduino-Joypad-Game and you can check:

Microduino-Joypad_Getting_start

• Step 2: Stack Microduino-Core and Microduino-USBTTL on the panel of Microduino-Joypad-Game;

• Step 3: Download all the libraries and codes needed and then update the library to the compiler 【Install Arduino IDE Microduino Program Library Support Package】

• Step 4: Open the program example
  • Switch the code of the joystick and the button control:

      if(Joypad.readButton(CH_SWITCH_R))
      {
      if(Joypad.readButton(CH_SWITCH_2)==0)
      joyx=100;
      else if(Joypad.readButton(CH_SWITCH_4)==0)
      joyx=-100;
       if(Joypad.readButton(CH_SWITCH_1)==0)
      joyy=-100;
      else if(Joypad.readButton(CH_SWITCH_3)==0)
      joyy=100;
      else if(Joypad.readButton(CH_SWITCH_1)==1&&Joypad.readButton(CH_SWITCH_2)==1&&Joypad.readButton(CH_SWITCH_3)==1&&Joypad.readButton(CH_SWITCH_4)==1)
      {
      joyx=0;
      joyy=0;
      }
      }
      else
      {
      joyx = map(Joypad.readJoystickX(), -280, 300, 100, -100);
      joyy = map(Joypad.readJoystickY(), -300, 230, -100, 100);
      }

Button control is the default setting by turning the left and the right switches to the top. So, the opposite operation is gravity induction control. Users can change the setting according to personal needs.

• Vibration motor control:

Joypad.motor(0);//Close  
Joypad.motor(X);//0-255 Vibration can be adjusted

• Buzzer

digitalWrite(speak,LOW);//Close 
digitalWrite(speak,HIGH);//Open

Step 5: Compile the code and select the right board and COM port for download. After that, you can start to play. The sore is on the right top. Users can also try to use gravity induction control according to individual needs.