Difference between revisions of "Microduino-Module Core MK22"

Microduino-Core MK22 is a 32-bit microcontroller development core board with the MK22FN512VLH12 as the core, and it is an open-source controller module.

Microduino-Core MK22 integrates USB communication, and its pins meet the microduino specification.

Microduino-Core MK22 uses the development environment of mbed platform C++ language. Players can use Microduino and other electronic components, modules and sensors to make abundant funny interactive works.

Features

• The microcontroller is based on Cortex-M4 kernel；
• CPU frequency can achieve 120MHz；
• Small, cheap, stackable and open；
• Open-source hardware circuit design, and compatible-with-mbed development environment；
• Support USB function；
• Unified Microduino interface specification, and abundant periphery modules, which can be quickly extended and connected with other modules and sensors which meet the Microduino interface specification, conveniently and flexibly；
• 2.54-spacing female header connector interface is convenient for integration to the pegboard.

Specification

• Support DSP.
• DMA controller with 16 channels.
• Support RTC.
• Support hardware CRC.
• Each chip has a 128-bit ID number singly.
• Support the generation of hardware random numbers.
• Digital I/O ends, 22 totally：
  • On the module labeled D0~D13 and A0~A7.
• Analog I/O ends, 11 totally：
  • On the module labeled A0, A1, A2, A3, SDA, SCL, A6, A7, D4, D5, and D6；
  • Each provides 16-bit resolution. By default, the measurement range of the analog voltage is the value from GND to 3.3V；
• PWM support, 6 totally：
  • On the module labeled D0, D1, D6, D7, D8, and D9.
• Serial port support, 3 totally：
  • On the module labeled D0(RX), D1(TX), D2(RX), D3(TX), D4(RX), and D5(TX).
• SPI support, 1 totally：
  • On the module labeled D13(SCK), D12(MISO), D11(MOSI), and D10(SS).
• I2C support, 1 totally：
  • On the module labeled SDA,SCL.
• External interrupt supports, 7 totally：
  • On the module labeled D2, D4, D9, D12, D13, A0, and A3.

• Pins description：

Documents

• Main components used in Microduino-Core MK22
  • MCU：File:K22P121M120SF7.pdf
• Schematic diagram：File:Microduino-Core MKS22.pdf

Development

• 1、Enter mbed Main page, and register.
• 2、After the registration, return to Main page, and click “Compiler” to enter the online compiling mode.
• 3、After compiling the program, click “Compile” to make it download the file bin automatically after the success of compiling and linking.
• 4、Download JFlash：https://www.segger.com/jflash.html
• 5、Download bin to MK22 through JFlash to run it.

Application

FAQ

Purchase

History

Gallery

Frontage

Back

Video