Difference between revisions of "Microduino-Shield Solo"

Latest revision as of 23:32, 1 August 2017

Language:	English • 中文

Microduino-Solo

Microduino-Solo is sensor module expansion board based on Microduino core module.

Pin compatible with Arduino uno;
2.54 pitch Female Header is Microduino module based, the same name of the pins are connected to each other in the board, each pin is installed with the power and ground to facilitate debugging;
Define unified interface Microduino specification and contain rich peripheral modules. Set up the quick connection with other Microduino modules and sensors easily and flexibly.

Microduino-Solo-Pinout

Set up the quick connection with other Microduino modules and sensors easily and flexibly.

You can download Microduino provides testing program, D13 digital port connects the LED:
Prepared hardware: Microduino FT232R, Microduino Core, Microduino UNO;
Prepared software: Microduino provides testing program（Arduino part）, Arduino IDE（1.0 release upper);
Open the testing program using IDE firstly, then card type choose "Microduino Core (Atmega328P@16M,5V)", download directly, then the LED flashes every second once after download is completed.

Microduino Solo Front

Microduino Solo Back

@@ Line 10: / Line 10: @@
 ==Feature==
 *Pin compatible with Arduino uno;
-*2.54 pitch Female Heade is Microduino module based, the same name of the pins are connected to each other in the board, each pin is installed with the power and ground to facilitate debugging;
+*2.54 pitch Female Header is Microduino module based, the same name of the pins are connected to each other in the board, each pin is installed with the power and ground to facilitate debugging;
 *Define unified interface Microduino specification and contain rich peripheral modules. Set up the quick connection with other Microduino modules and sensors easily and flexibly.
 |-
 |
 ==Specifications==
 *3.3V regulator;