Difference between revisions of "Buggy Base (use with mDesigner)"
From Microduino Wiki
| Line 5: | Line 5: | ||
*2 Color LEDs | *2 Color LEDs | ||
*Buzzer | *Buzzer | ||
| + | |||
| + | The above components are not controlled directly (i.e. via pins). Rather there is an embedded micro-controller which controls those components. The embedded micro-controller can be communicated via serial communication. | ||
| + | |||
| + | Buggy Base was developed to a line-detecting vehicle base, but can be re-purposed for other uses such as a walking robot or climbing robot (as shown in the Itty Bitty Buggy projects). | ||
Revision as of 22:46, 15 October 2018
The Buggy Base found in the Itty Bitty Buggy kit is a unique piece of hardware. It contains the following:
- Motor driver
- 2 Motors
- 2 Line Finders
- 2 Color LEDs
- Buzzer
The above components are not controlled directly (i.e. via pins). Rather there is an embedded micro-controller which controls those components. The embedded micro-controller can be communicated via serial communication.
Buggy Base was developed to a line-detecting vehicle base, but can be re-purposed for other uses such as a walking robot or climbing robot (as shown in the Itty Bitty Buggy projects).
