Difference between revisions of "Microduino Enc Wired network experiment -302KIT"

From Microduino Wiki
Jump to: navigation, search
(Created page with "{| style="width: 800px;" |- | ==Outline== Project：Microduino Enc Wire Network Experiment Objective：Use the Microduino Enc module to connect the Microduino RJ45 and Microd...")
 
Line 1: Line 1:
 +
{{Language|Microduino_Enc有线网络实验-302KIT}}
 
{| style="width: 800px;"
 
{| style="width: 800px;"
 
|-
 
|-

Revision as of 15:22, 2 March 2014

Language: English  • 中文

Outline

Project：Microduino Enc Wire Network Experiment

Objective：Use the Microduino Enc module to connect the Microduino RJ45 and Microduino core. In local network to control 4 LEDs and achive network control.

Difficulty：Elementary

Time-consuming：One hour

Maker：Microduino Studio-YLB

Bill of Materials

  • Microduino equipment：
Module Number Function
Microduino-Core(Microduino Core+) 1 Slave, receive control signal
Microduino FT232R 1 Download program
Microduino Enc(Microduino Rj45) 2 Wireless communication
  • Other equipment：
Router one
Network cable one
micro usb data cable one
LED Four
Bread board one
Breadboard jumper one box
302KIT-module

Document

Debugging

Step 1：Set up router network

Power on router, and connect the PC to network.

Step 2：Set up hardware

Install all Microduino module, use the extension board Microduino Duo-V for easy debugging.

302KIT-module
302KIT-system

Step 3：Downlaod program

Start Arduino IED, open the Microduino example program, board type choose "Microduino Core (Atmega328P@16M,5V)", download directly.

Step 4：Connect the network cable

Connect the microduino RJ45 to LAN port of router.

Step 5：Control the LED in loacal network

Open a new web page, enter into the address "myip". Microduiono networking success can enter the control interface, or can not be opened.

Myip

Result

Connect the Microduino core to network, control the LED by the button on web page. Press button, LED light, then press again, LED off.

Note

  • Microduino Enc must be used with Microduino RJ45 together.
  • Need configure the MAC address and ip address in local network.

Video

http://v.youku.com/v_show/id_XNjY1Njg5Nzcy.html

Retrieved from "https://wiki.microduinoinc.com/index.php?title=Microduino_Enc_Wired_network_experiment_-302KIT&oldid=2442"