Difference between revisions of "Microduino-Shield Cube-S1"

Microduino-Cube-S1

Features

• Pin compatible with Arduino uno;；
• 2.54 pitch board is the base for Microduino module, the same name pin are connected to each other on board, easy to debug.
• Define unified interface Microduino specification and contain rich peripheral modules. Set up the quick connection with other Microduino modules and sensors easily and flexibly;
• Onboard analog buttons, extended interface；

Specification

• Electrical specifications
  • MicroUSB power supply；
  • 3.3V regular；
  • Select the 5V or 3.3V power via PWR jumper, default is 3.3V；
  • Onboard power supply (5V、PWR) indicator；

• Extended pin
  • Onboard reset button；
  • OLED fixed base；
  • Two serial ports, RX0、TX0(Serial) and D2、D3(Serial1)；
  • Two IIC interfaces；
    • Two analogy button interfaces, and connect to A7；
  • Sensor interface can be combined by jumper, The player can make the connection by yoursefl, as follows：
    • PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND.

Microduino-Cube-S1

Microduino-Cube-S1-Pinout

Microduino-Cube-S1-Pinout

Document

Eagle PCB local downlaod Main components：

• 3.3V Regulator chip LP2985： File:LP2985.pdf

Development

It can be used with other Microduino modules, sensor to achieve specific functions.

Microduino-Cube-S1

Application

• You can download the test example, and combine OLED to test two analogy of Microduino-Cube-S1, test program：

https://github.com/Microduino/Microduino_Tutorials/commit/b0e0fe74269ee0f6a886d8fa8db497ec57cc4073

• Prepared hardware：Microduino FT232R, Microduino Core, Microduino-Cube-S1, Microduino OLED；
• Prepared software：Microduino example program (Arduino part), Arduino IDE(1.0 release and upper)；
• Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", download directly;
• After download, OLED displays "No button is pressed ",
  • Press the left button, OLED displays "Press the left button" which means the left button was pressed；
  • Press the right button, OLED displays "Press the rignt button" which means the right button was pressed；
  • If no button was pressed, OLED displays "No button is pressed ", the same state with initial state.

Bug

History

Picture

Front

Microduino-Cube-S1 Front

Back

Microduino-Cube-S1 Back

Video