Difference between revisions of "Microduino-Shield Cube-V1"

From Microduino Wiki
Jump to: navigation, search
(→‎Features)
(→‎Specifications)
Line 12: Line 12:
  
 
==Specifications==
 
==Specifications==
−
*Electrical specifications
+
*Electrical specification
 
**MicroUSB power supply；
 
**MicroUSB power supply；
−
**3.3V regular；
+
**3.3V constant voltage；
−
**Select the 5V or 3.3V power via PWR jumper, default is 3.3V；
+
**Select the 5V or 3.3V power via PWR jumper.(The default voltage is 3.3V)；
−
**Onboard power supply (5V、PWR) indicator；
+
**Onboard power supply indicator(5V and PWR)；
  
−
*Extended pin
+
*Extension
 
**Onboard reset button；
 
**Onboard reset button；
−
**OLED fixed base；
+
**Fixed OLED base；
−
**Two serial ports, RX0、TX0(Serial) and D2、D3(Serial1)；
+
**Two serial ports including (RX0,TX0)and (D2,D3)；
 
**Two IIC interfaces；
 
**Two IIC interfaces；
−
**Two analogy button interfaces, and connect to A7；
+
**Two analog button interfaces connected to A7；
−
**Seven analogy buttons. Two buttons on base board and connected to A6. Five button on overlay board and connected to base analogy button interface by DuPont line；
+
**Seven analog buttons with two on the board connected to A6 and five on the stacking board connected to the interface of the base with Dupont lines；
−
**Two group sensor interface, can be combined by jumper. The player can make the connection by yoursefl, as follows:
+
**Below are two groups of sensor interfaces which can be selected and combined through jumpers. Users can choose different jumper connection as they like:
 
***PWR，GND，A3 or PWR，GND，A6；
 
***PWR，GND，A3 or PWR，GND，A6；
 
***PWR，D5，GND or D4，D5，GND。
 
***PWR，D5，GND or D4，D5，GND。
Line 35: Line 35:
  
 
*Components
 
*Components
−
**base board：with two UPin-27 standard interface;
+
**Base board：The board with two UPIN-27 standard interfaces;
−
**Overlay board: use to fix the five analogy buttons, OLED;
+
 
 +
**Overlay board: The fixed board of five analog buttons and an OLED;
 
[[file:Microduino-Cube--Pinout1-Pinout4.jpg|800px|thumb|center|Microduino-Cube-S1]]
 
[[file:Microduino-Cube--Pinout1-Pinout4.jpg|800px|thumb|center|Microduino-Cube-S1]]
  

Revision as of 07:45, 15 August 2014

Language: English  • 中文
Microduino-Cube-V1

Features

  • Pin compatible with Arduino uno;
  • Two UPin-27 standard interface bases connected with the corresponding pins；
  • Uniformed Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard;
  • Two bases are arranged longitudinally with pins interconnected on the board, making it possible to reduce the stacking height;
  • Onboard analog button and sensor interface;

Specifications

  • Electrical specification
    • MicroUSB power supply；
    • 3.3V constant voltage；
    • Select the 5V or 3.3V power via PWR jumper.(The default voltage is 3.3V)；
    • Onboard power supply indicator(5V and PWR)；
  • Extension
    • Onboard reset button；
    • Fixed OLED base；
    • Two serial ports including (RX0,TX0)and (D2,D3)；
    • Two IIC interfaces；
    • Two analog button interfaces connected to A7；
    • Seven analog buttons with two on the board connected to A6 and five on the stacking board connected to the interface of the base with Dupont lines；
    • Below are two groups of sensor interfaces which can be selected and combined through jumpers. Users can choose different jumper connection as they like:
      • PWR，GND，A3 or PWR，GND，A6；
      • PWR，D5，GND or D4，D5，GND。
Microduino-Cube-V1-Pinout
Microduino-Cube-V1-Pinout
Microduino-Cube-V1-Pinout


  • Components
    • Base board：The board with two UPIN-27 standard interfaces;
    • Overlay board: The fixed board of five analog buttons and an OLED;
Microduino-Cube-S1

Document

Eagle PCB local download Main components：

Development

It can be used with other Microduino modules, sensor to achieve specific functions.

Application

  • You can download the test example, and combine OLED to test two analogy of Microduino-Cube-V1, test program Microduino-Cube-V1-Text.zip
  • Prepared hardware：Microduino FT232R, Microduino Core, Microduino-Cube-V1, Microduino OLED；
  • Prepared software：Microduino example program (Arduino part), Arduino IDE(1.0 release and upper)；
  • Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", download directly;
  • After the download is completed, OLED displays similar patterns with analogy keyboard. Press each button on floor and roof analog buttons can simulate the corresponding position's button.

Buy

History

Picture

Front

Microduino-Cube-V1 Front

Back

Microduino-Cube-V1 Back

Video

Retrieved from "https://wiki.microduinoinc.com/index.php?title=Microduino-Shield_Cube-V1&oldid=2688"