Music Box(Joystick)

Language:	English • 中文

Overview

Build a music box here! You can play the music files in the TF card, select the song with Joystic rocker and change volume.

Schematic

Rocker XY direction movement detection by reading the analog value to judge. At

the same judge to stay the length of time to select the control mode.

Equipment

Module	Number	Function
mCookie-CoreUSB/zh	1	Core board
mCookie-Hub/zh	1	Sensor pin board
mCookie-Audio/zh	1	Audio Module
mCookie-Amplifier/zh	1	Power amplifier module
mCookie-BM/zh	1	Battery Management
Microduino-Joystick/zh	1	JoyStick

Other Equipment：
- 2 Speaker
- 1 Batteray
- 1 TF card

Code

Setup 1：Connect the CoreUSB module to your computer and then start the

Arduino IDE.

Setup 2：Select Files>Examples>mCokie>_203_MusicBox_Joystick

Setup 3：Click upload button to upload program. When "Done Uploading"

appears, the program should have successfully been uplloaded into the CoreUSB.

Software Debuge

” audio.h” Audio lib file
Audio module Serial uses D2, D3

#include <SoftwareSerial.h>

SoftwareSerial mySerial(2, 3); // RX, TX

#define AUDIO_PORT mySerial

Detection rocker value

int uiStep()         //Change songs
{
  if (analogRead(A0) < 100)  //Y-up
  {
    delay(50);       //50 ms delay
    if (analogRead(A0) < 100)      //
      return 1;      //return 1
  }
  if (analogRead(A1) < 100)    //
  {
    delay(50);       //50 ms delay
    if (analogRead(A1) < 100)  //X-Right
      return 2;      //return 2
  }
  if (analogRead(A1) > 900)    //X-Left
  {
    delay(50);       //50 ms delay
    if (analogRead(A1) > 900)  //
      return 3;      //Return to 3
  }
  return 0;
}

OLED displays interface and user can change it.

 //The main interface can be freely changed. 
void draw()
{
  setFont_L;

  u8g.setPrintPos(4, 16);
  u8g.print("Music_sta:");
  u8g.print(music_status ? "play" : "pause");

  u8g.setPrintPos(4, 16 * 2);
  u8g.print("Music_vol:");
  u8g.print(music_vol);
  u8g.print("/30");
  u8g.setPrintPos(4, 16 * 3);
  u8g.print("Music_num:");
  u8g.print(music_num);
  u8g.print("/");
  u8g.print(music_num_MAX);
  u8g.setPrintPos(4, 16 * 4);
  u8g.print("....Microduino....");
  //u8g.print(rtc.formatTime(RTCC_TIME_HMS));
}