Template:Sensor explain

From Microduino Wiki
Revision as of 07:49, 19 September 2016 by Fengfeng (talk)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Sensor backpin.png
  • Pins of the sensor:
    • PIN1: GND
    • PIN2: VCC
    • General signal pins:
      • PIN3(IO1): digital/analog signal
      • PIN4(IO2): NC(null)
    • Special signal pins:
      • If it is IIC: IO1/IO2 are respectively SDA/SCL.
      • If it is soft serial port: IO1/IO2 are respectively tx/rx.
  • Special to A sensor pins
    • PIN1: GND
    • PIN2: VCC
    • PIN3(IO1): pin mode
    • PIN4(IO2): pin mode


Microduino sensor can communicate with core module through the connection with Microduino-Module Sensor Hub.

Retrieved from "https://wiki.microduinoinc.com/index.php?title=Template:Sensor_explain&oldid=14327"