Getting started: Mixly for Mac

Download

• Download the latest Mixly for Mac from: https://www.microduino.cc/download

Installation

• Change your settings to allow identified developers by going to: (Apple Logo) >>> System Preferences...
• Then go to Security & Privacy.

• Click on then Lock icon and enter your credentials to be able to change settings.
• Under Allow apps download from: select App Store and identified developers
• Click the Lock icon again to lock and save changes.

• After downloading Mixly for Mac extract the zip file -OR- if you are using Safari the zip file should automatically unzip.
• Go to the Mixly for Mac folder
• Open the Drivers folder. Drivers are needed to communicate with the Microduino hardware.

• Install ONE of the driver packages:
  • Driver_OS10.3.mpkg if you have Mac OS 10.3 or below.
  • Driver_OS10.4-10.8.mpkg if you have Mac OS 10.4 to Mac OS 10.8.
  • Driver_OS10.9-Newer.mpkg if you have Mac OS 10.9 or newer.
• Follow the on-screen instructions to install the driver.

• Once completed. Open the USBTTL-C Install folder. This is another driver that needs to be installed.
• (Note: The Mac OS X 10.6 or older package does not contain this. Therefore, you can skip this step.)

• Open CH34x_Install.pkg. Follow the on-screen instructions to install the driver.

• NOTE: You can move this entire folder to your Desktop or somewhere else for easier access.
• Open Mixly.jar