Setup Guide on Mac OS X

Equipment Software： Microduino software develop environment Arduino IDE, Microduino IDE configure pagckage; Hardware: Microduino FT232R、Micro-USB cable； Congfigure procedure Download Arduino IDE on http://arduino.cc/en/Main/Software Arduino IDE for Mac Uncompress the Arduino IDE package to Applications folder; Download and install the USB driver on http://www.ftdichip.com/Drivers/VCP.htm USB driver for Mac Right click (or click with two fingers) the Arduino app in Applications folder, select the ""Show Package Contents"" Show Package Contents Download and uncompress the Microduino hardware package File:Microduino-hardware.zip Place the Microduino folder into "/Applications/Arduino.app/Contents/Resources/Java/hardware" Place of hardware folder Connect the Microduino FT323R to your Mac computer with the Micro-USB cable; Open the Arduino app, Click the ""Tools"" menu, you will see Microduino family under "Board" menu. Microduino boards And something like "/dev/tty.usbserial-XXXXXXXX" Serial Port Select the correct board model and serial port, you can now enjoy the limitless possibility Microduino brings to you. One of our dear community members created a PDF document about this procedure, you can take that as a reference: File:Mac microduino.pdf