Joypad-Game-Snake

Outline We adopt Microduino-Joypad-Game to play the game of Snake. Bill of Material Microduino Equipment Module Number Function Microduino-Core 1 Core Microduino-USBTTL 1 Program download Microduino-Joypad 1 File:Microduino-Joypad-snake.jpg 600px Download TFT library: https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Libraries/_01_Microduino_TFT_ST7735 Joypad lib: https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Libraries/_08_Microduino_Shield_Joypad Code: Microduino_JoyPad_Game Debuging Step 1: Prepare Microduino-Joypad-Game and you can refer to: Microduino-Joypad_Getting_start Step 2: Stack Microduino-Core and Microduino-USBTTL on Microduino-Joypad-Game; Step 3: Download the library and code, and then update the library to compiler【Install Arduino IDE Microduino Program Library Support Package】 Step 4: Open program example. Switch the code of the joystick and the button control: if(Joypad.readButton(CH_SWITCH_R)) { if(Joypad.readButton(CH_SWITCH_2)==0) Joy=3; else if(Joypad.readButton(CH_SWITCH_4)==0) Joy=2; if(Joypad.readButton(CH_SWITCH_1)==0) Joy=1; else if(Joypad.readButton(CH_SWITCH_3)==0) Joy=4; else if(Joypad.readButton(CH_SWITCH_1)==1&&Joypad.readButton(CH_SWITCH_2)==1&&Joypad.readButton(CH_SWITCH_3)==1&&Joypad.readButton(CH_SWITCH_4)==1) Joy=0; } else { if(x>280||x1>280) Joy=2;// else if(x<-280||x1<-280) Joy=3;// else if(y<-280||y1<-280) Joy=1; else if(y>280||y1>280) Joy=4; else Joy=0; } Button control is the default setting by turning the right switches to the top. Users can change the way of switch. Vibration motor control: Joypad.motor(0);//Close Joypad.motor(X);//0-255 The vibration is adjustable. You can change color in "colour.h". Step 5: Compile the code and select the right board and COM port for download after successful compiling. Experience:　 The initialized picture will remind you "Please move to start". You can move to the right or press the key of "2" to enter the game. It will show the score after the game is over.