Microduino-Shield Encoder

Language:	English  • 中文

Microduino- Encoder Microduino-Encoder is an application board based on rotary encoder control. Feature Uniform Microduino interface standard and rich external modules, easy for connection with other modules and sensors with Microduino interface standard; Onboard analog key and sensor interface; Onboard rotary encoder. Specification Electrical specification MicroUSB power supply. 3V3 stabilivolt. PWR can select different voltage values (5v or 3.3v) through jumpers. Onboard power source(5v and 3.3v) indicator. Extension Onboard reset key. OLED fixation base board. Serial RX0 and TX0 interface. Two IIC interfaces. Two analog keys connected to A6. There are bonding pads of analog serial port(A0,A1 and A2) and GND on the base board.(5v and 3.3v): Microduino-Encoder-Pinout Microduino-Encoder-Pinout Document Chip：File:Xxxx.pdf Rotary encoder：File:Xxxx.pdf Development It can has a fast connection and extension with encoder and other Microduino modules to achieve different function. Application You can download Microduino test programs to have a simple test of its function: Rotary Encoder Test All Hardware: Microduino USBTTL, Microduino-Core and Microduino- Encoder; All Software: Microduino test program(Arduino terminal) and Arduino IDE(Version 1.0 or higher); Open Microduino test program with IDE, choose Microduino-Core(Atmega328P@16M,5V) as the board and then download; Open serial monitor after download and confirm baud rate as 115200; Data keeps increasing when rotating right; Data keeps decreasing when rotating left; Press down the encoder and the data clears; Purchase History Picture Front File:Microduino-Encoder-F.JPG Microduino-Encoder Front Back File:Microduino-Encoder-b.JPG Microduino-Encoder Back Video