Sensor-Dot Matrix-S2

Language:	English  • 中文

File:Dot Matrix-S2front.jpg 400px The product number of Microduino-Dot Matrix-S2 is: MSDL32 Microduino-Dot Matrix-S2 is a 8x8 single color LED dot matrix displaying module, which can be used singly or by the cascade of multiple（combine into different shapes）, to display text or images, or even simple animation. Features 8x8 dot matrix, the size is 32mm*32mm The brightness of each point is 32-grade adjustable Supports IIC communication protocol, the IIC address is settable（1~64）, and the dot matrix sequence adopts rectangular plane coordinate system. With 2 IIC interfaces onboard, which make the cascade of multiple dot matrix easy. Specification Sensor voltage 5V working voltage Sensor current 300mA at most Sensor size Size of the board: 60mm*60mm 1.27mm-spacing 4Pin interface connected with sensorhub Function description 8x8 dot matrix The brightness of each point is 32-grade adjustable Supports IIC communication protocol, the IIC address is settable（1~64）, and the dot matrix sequence adopts rectangular plane coordinate system. With 2 IIC interfaces onboard, which make the cascade of multiple dot matrix easy. Connection This sensor can be connected to the I2C interface of the core. The cascade of multiple sensors is supported, 64 at most. Documents Schematic diagram: File:Dot Matrix-S2.zip You can experiment with the sample programs in the following IDE libraries on your own : _01_Microduino_DotMatrix Development Program Download Download and unzip the program File:Dot Matrix-S2.zip Programming Follow the Software Getting Started Guide. Select the Board, Processor and Port. Click [File]->[Open], browse to the project program address, and click "Dot Matrix-S2.ino" to open the program. After confirming all these items are correct, click "→" to download the program to the development board. Hardware Setup Referring to the following diagram, connect the Sensor-Dot Matrix-S2 to the I2C interface of Microduino-Sensorhub. Method to Set the Address of the Dot Matrix The range of the address of the dot matrix is 1~64. After being powered, the number of the green points displayed on the dot matrix represents the address of the dot matrix. During 3s after the dot matrix is powered, pressing the button on the back can enter address configuration state, and at this time, the dot matrix changes into white. Pressing the button slowly （the interval is larger than 0.5s）will add the address Pressing the button quickly（the interval is less than 0.5s）will reduce the address After setting the address, long press the button for 3s, to exit the address configuration state. Introduction of the Code Define the IIC address of single dot matrix. uint8_t Addr[MatrixPix_X][MatrixPix_Y] = { //1x1 { 64} }; Define the IIC address of 2x2 cascade dot matrix. uint8_t Addr[MatrixPix_X][MatrixPix_Y] = { //2x2 { 64, 63}, { 62, 61} }; Define the IIC address of 1x4 cascade dot matrix. uint8_t Addr[MatrixPix_X][MatrixPix_Y] = { //1x4 { 64, 63, 62 , 61} }; Get the number of devices which have already been connected. int16_t getMatrixNum() Get the IIC address of devices which have already been connected getDeviceAddr(_a) //num Get the number of the dot matrix on X axis. getWidth() Get the number of the dot matrix on Y axis. getHeight() Set the on or off of the dot matrix coordinate pixel setLed(_row, _col, _state) //row, col, state Set the brightness of the dot matrix coordinate pixel setLedBrightness(_row, _col, _value) //row, col, value Clear the screen clearDisplay() Set the brightness of the dot matrix setBrightness(_value) //value The characters are displayed flowingly writeString(_c, _t, _col) //[char*], time, col Hex bitmap display drawBMP(_row, _col , _w, _h, logo) //row, col, width, height, file BMP display（You can refer to The dot matrix module displays BMP color map） drawBMP(_row, _col, logo) //row, col, file Use function to display a solid rectangle drawBox(_row, _col, _w, _h) //row, col, width, height Draw a solid rounded rectangle. drawRBox(_row, _col, _w, _h, _r) //row, col, width, height, rad Draw a hollow rectangle drawFrame(_row, _col, _w, _h) //row, col, width, height Draw a rounded hollow rounded rectangle drawRFrame(_row, _col, _w, _h, _r) //row, col, width, height, rad Draw a hollow circle. drawCircle(_row, _col, _r) //row, col, rad To draw a solid circle drawDisc(_row, _col, _r) //row, col, rad To draw a straight line drawLine(_row, _col, _row1, _col1) //row start, col start, row end, col end Application Open Source LED Dot Matrix Screen Open Source LED Dot Matrix Clock Gallery File:Microduino-DotMatrix-S2-F.jpg Front File:Microduino-DotMatrix-S2-B.jpg Back