Template:Sensor explain

From Microduino Wiki
Revision as of 03:52, 9 August 2016 by Fengfeng (talk) (Created page with " Sensor backpin.png 传感器的引脚： PIN1：GND PIN2：VCC 一般信号引脚： PIN3(IO1)：数字信号/模拟信号 PIN4(IO2)：NC(空) 特殊信号引脚： IIC引...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Sensor backpin.png 传感器的引脚： PIN1：GND PIN2：VCC 一般信号引脚： PIN3(IO1)：数字信号/模拟信号 PIN4(IO2)：NC(空) 特殊信号引脚： IIC引脚：IO1为SDA,IO2为SCL 软串口引脚：IO1为软串口tx,IO2为软串口rx 针对Sensor-Hall/zh传感器引脚 PIN1：GND PIN2：VCC PIN3(IO1)：模拟信号输入 PIN4(IO2)：NC

Microduino传感器可通过连接Microduino-Module Sensor Hub/zh来和核心模块通讯。

Retrieved from "https://wiki.microduinoinc.com/index.php?title=Template:Sensor_explain&oldid=14322"