Selecting board, processor, and port
From Microduino Wiki
Revision as of 17:32, 28 December 2016 by Sonny (talk) (Created page with "In order to upload programs onto Core modules, the correct board, processor and port needs to be selected. =Selecting the Board and Processor= =Selecting the Port= Port...")
In order to upload programs onto Core modules, the correct board, processor and port needs to be selected.
Selecting the Board and Processor
Selecting the Port
Port selection is dependent on which programmer is connected. But it is usually the only select-able port in the list.
If there is no select-able port ensure that:
- the hardware connections are secure and correct
- the drivers are installed.
