Mixly Block Category - SerialPort
From Microduino Wiki
Serial is used for communication between the Microduino / Arduino board and a computer or other devices. All Microduino / Arduino boards have at least one serial port (also known as a UART or USART): Serial. It communicates on digital pins 0 (RX) and 1 (TX) as well as with the computer via USB. Thus, if you use these functions, you cannot also use pins 0 and 1 for digital input or output.
Read more here: https://www.arduino.cc/en/Reference/Serial
Contents
Serial Baud Rate
Sets the data rate in bits per second (baud) for serial data transmission. For communicating with the computer, use one of these rates: 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, or 115200.
Read more here: https://www.arduino.cc/en/serial/begin
Serial Write
Serial Print
Serial PrintLn
Serial PrintLn(Hex)
Serial Availability
Serial Read String
Serial Read String Until Character Delimitation
Serial Read
- read
- peek
- parseInt
- paraseFloat
