Getting Started with 101 Basic Kit (Windows)

From Microduino Wiki
Revision as of 15:27, 23 May 2018 by Sonny (talk | contribs) (Printed Manual)
Jump to: navigation, search

Download and Install Software

NOTE: This product is discontinued and no longer supported in the latest software package.
Please download the legacy software package here: http://microduinoinc.com/downloads/Arduino+IDE+1.6.9+for+Microduino.exe
IMPORTANT: If you have downloaded and installed the latest software package from the download page. Please uninstall it first before proceeding!
*Go to Control Panel > Uninstall a Program, then select "Arduino IDE for Microduino"
*Then delete the "C:\Program Files (x86)\Arduino IDE for Microduino" as some remaining files may cause issues.

1. Download the legacy Windows IDE: http://microduinoinc.com/downloads/Arduino+IDE+1.6.9+for+Microduino.exe

Arduino Logo.png

2. Double click on the setup file to start the installation process. Click Next.

WinInstallLegacy 01.png

3. The next window will allow you to select which options to install. Leave all checked and click Next.

WinInstallLegacy 02.png

4. Select the location to install the software, or leave the default install location. Click Next.

WinInstallLegacy 03.png

5. Select the name for the shortcut in the Start Menu, or leave the default shortcut name. Click Install.

WinInstallLegacy 04.png

6. The installation process will begin for the Arduino IDE. Wait until it completes.

WinInstallLegacy 05.png

7. After the Arduino IDE has been installed, a window for driver installation will appear. Click Extract.

WinInstallLegacy 06.png

8. Device Driver Installation Wizard will appear. Click Next.

WinInstallLegacy 07.png

9. Device Driver Installation Wizard will complete. Click Finish.

WinInstallLegacy 08.png

10. Another driver setup window should've appeared. Check your taskbar for the following window. Click INSTALL to install this driver.
A message will appear once the driver has been installed. Close this window after the driver has successfully installed.

WinInstallLegacy 09.png

11. Another window which displays the software has completed should've appeared. Check your taskbar for the following window. Click Finish to finish the installation process and launch the software.

WinInstallLegacy 10.png

12. The software is now ready to be used!

WinInstallLegacy 11.png

Configuring and Testing the Software/Hardware

  1. Open the Microduino software.
    ArduinoIcon.png

  2. Go to “Tools > Board” and select “Microduino/mCookie-device”
    Select Board Legacy.png

  3. Go to “Tools > Processor” and select “Microduino/mCookie-Core USB (32u4)”
    Select CoreUSB Legacy.png

  4. Connect the CoreUSB to your computer using a MicroUSB cable. DO NOT have any other modules stacked or connected.
    CoreUSB Ble pc.jpg

  5. Go to “Tools > Port” and select the port. It is usually the one that is select-able.
    Select CoreUSB Port Legacy.png

  6. With the default sample code. Hit upload (right arrow icon on the top left of the software).
    Upload CoreUSB Legacy.png

  7. The code will compile and will say upload complete if successful. Congratulations the software setup is complete!
    Upload CoreUSB Complete Legacy.png

Projects

Follow the printed manual to build and program Itty Bitty City's projects.


Download the digital version of the printed manual:
101 Printed Manual.png