Buggy Base (use with mDesigner)

From Microduino Wiki
Revision as of 22:46, 15 October 2018 by Sonny (talk | contribs)
Jump to: navigation, search

The Buggy Base found in the Itty Bitty Buggy kit is a unique piece of hardware. It contains the following:

  • Motor driver
  • 2 Motors
  • 2 Line Finders
  • 2 Color LEDs
  • Buzzer

The above components are not controlled directly (i.e. via pins). Rather there is an embedded micro-controller which controls those components. The embedded micro-controller can be communicated via serial communication.

Buggy Base was developed to a line-detecting vehicle base, but can be re-purposed for other uses such as a walking robot or climbing robot (as shown in the Itty Bitty Buggy projects).

Retrieved from "https://wiki.microduinoinc.com/index.php?title=Buggy_Base_(use_with_mDesigner)&oldid=22787"