ColorLED
Buggy Base contains two ColorLEDs on the underside. Each ColorLED is capable producing a wide variety of colors. The ColorLEDs are referenced as ColorLED "A" or "B" depending on the side it resides.
[Image of underside of buggy with A/B]
Set Color block
The ColorLEDs can be controlled using the ColorLED - Set Color block.
|
Function: This block sets the selected ColorLED to the chosen color.
- ColorLED - select ColorLED to set color for (either A or B).
- Color - color to set selected ColorLED to.
|
Example 1: Set the Color of ColorLED "A"
Description: When activated, ColorLED "A" on Buggy Base will turn red.
Example 2: Set the Color of ColorLED "B"
Description: When activated, ColorLED "B" on Buggy Base will turn green.
Example 3: Alternating ColorLEDs
|
|
Example
|
|
|
Description: When activated, the ColorLEDs on Buggy Base will alternative between being on and off. As described below.
- ColorLED "A" will turn red. ColorLED "B" will turn black (off).
- 1 second pause.
- ColorLED "A" will turn black (off). ColorLED "B" will turn green.
- 1 second pause.
- Loop forever.
Color Detector
Buggy Base also contains two Color Detector sensors on the underside, right next to the ColorLEDs. The Color Detectors are capable of detecting color. These are useful when following along a color line. The Color Detectors are referenced as Color Detector "A" or "B" depending on the side it is on.
Detect Color block
The Color Detector can be utilized using the Color Detector - Detect Color block.
|
Function: This block reads and returns either true or false if the selected color detector detects the selected test color.
- Sensor - select sensor for detection (either A or B).
- Color - color for the selected Sensor to match in order to return true. Otherwise, this block returns false.
|
Example 1: If a Color is detected, then play a note on the Buzzer
|
|
Example
|
|
|
Description: When activated, when Color Detector "A" detects green, then the Buzzer will play note C4 for 1 second.
