Microduino CC3000 get weather information by internet -203KIT

Language:	English  • 中文

Outline Project：Microduino CC3000 get the weather information Objective：Use Microduino CC3000 module to get the specific position's weather information from internet. This experiment need Microduino core+ module. Microduino-core module only can be used for some simple example program, you can try it by yourself. Difficulty：Elementary Time-consuming：2 hours Maker：Microduino Studio-YLB

Bill of Materials Microduino module：（MICRODUINO 202KIT） Module Number Function Microduino-Core 1 Core module Microduino-FT232R 1 Download program Microduino-CC3000 1 WiFi module Microduino-OLED 1 Display information

203KIT图片 Other equipment mic USB data cable, OLED Cable connections, bread board and cable connections Software package Arduino IDE(1.0 release or upper), Microduino test program (Arduino part), download the "TI WIFI SMARTCINFIG" from App Store.

Document

Debugging Setp 1：Set up hardware Install all module, use the Microduino extension board as the base which looks very beautiful overall.

203KIT图片

If no extension board, use the jumper to connect the Microduino OLED.

Step 2：download program Start Arduino IED, open the Microduino test program, board type choose "Microduino Core +(Atmega644P@16M,5V)", download directly.

Step 3: Open the "SMARTCINFIG" application Connect the IOS to router, turn on "TI WIFI SMARTCINFIG", input the "Password".

Step 4：Connect IOS device to Microduino Observe the Microduino OLED, when text “Waiting for a SmartConfig connection (~60s) ...” appears，press the "Start", then wait for OLED display the result.

SMARTCINFIG-Connection

Result After connection success, following information will be display in Microduino OLED上. City Wind speed and direction Temperature, humidity Visibility Access time

cc3000-data

Note Use Microduino Core+ module。 Connection process may timeout, not available, need to restart the connection again.