Microduino GPS recorder-306KIT

From Microduino Wiki
Revision as of 07:15, 26 August 2014 by Pkj (talk) (Debug)
Jump to: navigation, search
Language: English  • 中文

Outline

Project:Microduino GPS Recorder

Objective:Adopt the Microduino GPS module to acquire the geographic information and store it into Microduino-SD.

Difficulty:Elementary

Time-consuming:2 hours

Maker:Microduino Studio-YLB

Bill of Materials

  • Microduino module:(MICRODUINO 203KIT)
Module Number Function
Microduino-Core+ 1 Core module
Microduino-FT232R 1 Program download
Microduino-NEO-6M 1 GPS module
Microduino-SD 1 Information storage
Microduino-OLED 1 Information Display
306KIT picture

Document

Debug

Step 1:Build the hardware

Stack all the modules. Just put the GPS antenna outside, or it can not receive the signal.

306KIT
306KIT

Step 2:Download the program If wanting to keep the default jumper (RX0、TX1), you need to unplug the Microduino NEO-6M during the download;

Step 3:Debug Find an open area to debug for better signal. The current status of the module can be judged by the PPS indicator: lighting, indicates that the module has started to work, but hasn't achieved position information. Flashing (100ms off, 900ms on), means that the module has been successfully positioned.

Result

After get the position information, the parameters can be seen, and these data can be recorded into the memory card.

  • Walking speed
  • Latitude and longitude
  • Signal strength
  • The number of satellite
  • Altitude

Note

Video

http://v.youku.com/v_show/id_XNjY1NzE3NDQ0.html