Microduino-W5500

File:Microduino-W5500-pin-2.jpg

Microduino-W5500

Documents

• Eagle PCB File:Microduino-W5500.zip

Development

Arduino libraries and support packages: https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Libraries/_02_Microduino_Ethernet_WIZ

Widely applied in：

Home network device: STB,PVR and digital media adapter? Security system: DVR,IPC and kiosk

Factory and building automation systems, medical monitoring equipment and embedded server

Application

Networking Microduino core modules via sample programs:

Preparation

• All hardware needed: Microduino FT232R, Microduino Core, Microduino-W5500, router and network cable;
• All software needed：Higher version of Arduino IDE (1.0), libraries, debugging programs offered by Microduino (Arduino);
• Put the downloaded libraries into the folder of Arduino IDE installation libraries;
• Delete the previous Ethernet libraries;
• Stack all modules together and connect the LAN port and the network interface of Microduino-RJ45 module via internet cable;

Step 1：Acquire your IP address

• Start Arduino IDE, open sample program "DhcpAddressPrinter" and choose Microduino Core(Atmega328P@16M,5V) as the board; Download after successful compiling;
• Open serial monitor(Please note that the baud rate is 9,600 bits ), you can see "My IP address: XXX.XXX.XX.XXX." Then you can get your IP.

Step 2：Connect Microduino core modules through network and acquire web page information

• Open sample program"WebClient" and change the code address "IPAddress ip(192,168,0,177)" to the IP address that can readable, and then download after successful compiling.
• Open serial monitor after successful download, you can see "connecting...". If the connection goes well, you can print out the data acquired from network, such as

address, server, time and so on.

Front

Microduino-W5500 Front

Back

Microduino-W5500 Back

Video

|}