Microduino-Module nRF

From Microduino Wiki
Revision as of 01:36, 16 February 2014 by Pkj (talk)
Jump to: navigation, search
Language: English  • 中文
Microduino-nRF24

Microduino-nRF24 uses the newest 2.4GHz transceiver nRF24L01 from Nordic Semiconductor. This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401A and add some extra pipelines, buffers, and an auto-retransmit feature.

Designers can use Microduino-nRF24 in project without any wireless design , and just need to stack it with Microduino-Core or Microduino-Core+ through UPin-27, the standard Microduino interface will attach nRF24 and MCU with SPI bus, on transferring data.

Microduino-nRF24 works in the 1.9 to 3.6v voltage, the on-chip DC-DC regulator will automatically step down supply voltage to proper level.

Note: We now populate these boards with the nRF24L01+. The '+' version of the IC has improved range, sensitivity, and data rates. The command set is backward compatible with the original nRF24L01.


Features

  • Worldwide license-free 2.4GHz ISM band operation
  • Using the U-Shape 27-pin interface (UPin-27), the standard interface of Microduino
  • Delivered ready to plug in.
  • 2.54mm (0.1 inch) pin pitch, compatible to bread board and hole board


Specifications

  • Auto Acknowledge
  • Auto Re-Transmit
  • 100m Range at 250kbps
  • 250kbps to 2Mbit Data Rate
  • 32 Byte separate TX and RX FIFOs
  • Software selectable channel from 2400MHz to 2525MHz (125 Selectable channels)
  • 1Mbps and 2Mbps on-air data-rate
  • Enhanced ShockBurst? hardware protocol accelerator

Pin Description

Microduino-nRF24 Spec


NRF24L01 I/O Microduino I/O Function
SCK D13 SPI clock
SI D12 Data input
SO D11 Data output
CSN D10 SPI choose
CE D9 RX/TX mod choose

Documents

Development

Buy

History

Pictures

Microduino nRF24 Front
Microduino nRF24 Back


Retrieved from "https://wiki.microduinoinc.com/index.php?title=Microduino-Module_nRF&oldid=506"